Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 10: Percus...
ISO 28927-10:2011 specifies a laboratory method for measuring hand-transmitted vibration emission at the handles of hand-held power driven percussive machines with and without rotary action [portable rock drills, plug hole drills, rotary hammers, breakers (e.g. pavement breakers, concrete breakers or road breakers), riveting hammers, chipping hammers, pick hammers or similar]. It is a type-test…
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast...
IEC 61000-4-4:2004+A1:2010 Establishes a common and reproducible reference for evaluating the immunity of electrical and electronic equipment when subjected to electrical fast transient/bursts on supply, signal, control and earth ports. The test method documented in this part of IEC 61000-4 describes a consistent method to assess the immunity of an equipment or system against a defined phenomenon…
Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscilla...
IEC 61000-4-18:2006+A1:2010 relates to the immunity requirements and test methods for electrical and electronic equipment, under operational conditions, with regard to:
a) repetitive damped oscillatory waves occurring mainly in power, control and signal cables installed in high voltage and medium voltage (HV/MV) substations;
b) repetitive damped oscillatory waves occurring mainly in power,…
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residentia...
IEC 61000-6-3:2006+A1:2010 This part of IEC 61000 for EMC emission requirements applies to electrical and electronic apparatus intended for use in residential, commercial and light-industrial environments. Emission requirements in the frequency range 0 Hz to 400 GHz are covered. No measurement needs to be performed at frequencies where no requirement is specified. This generic EMC emission…
Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 11: Stone ...
ISO 28927-11:2011 specifies a laboratory method for measuring hand-transmitted vibration emission at the handles of hand-held stone hammers. It is a type-test procedure for establishing the magnitude of vibration in the gripping areas of a stone hammer when operated in laboratory conditions. It is intended that the results be used to compare different models of the same type of machine.
ISO 28927…
Acoustics — Measurement of airborne noise emitted and structure-borne vibration induced by small air...
ISO 10302-1:2011 specifies methods for measuring the airborne noise emitted by small air-moving devices (AMDs), such as those used for cooling electronic, electrical, and mechanical equipment where the sound power level of the AMD is of interest.
Examples of these AMDs include propeller fans, tube-axial fans, vane-axial fans, centrifugal fans, motorized impellers, and their variations.
ISO 10302…
Test method for determining the performance of combined space and water heating systems (combos)
1 Scope
1.1
This Standard describes the test procedures, test set-ups, and calculations required to determine the
performance, capacities, energy consumption, and overall efficiency of gas-fired and oil-fired combined
space and water heating systems (combos).
1.2
This Standard establishes laboratory methods for testing and rating the thermal performance and electrical
energy use of a combo…
Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 4: Straigh...
ISO 28927-4:2010 specifies a laboratory method for measuring hand-transmitted vibration emission at the handles of straight grinders. It is a type-test procedure for establishing the magnitude of vibration in the gripping areas of a machine fitted with a specified test wheel and run under no-load conditions.
ISO 28927-4:2010 is applicable to hand-held machines, driven pneumatically or by other…
