Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-1...
This group safety publication is primarily intended to be used as a product safety standard for the products mentioned in the scope, but shall also be used by technical committees in the preparation of their publications for products similar to those mentioned in the scope of this standard, in accordance with the principles laid down in IEC Guide 104 and lSO/lEC Guide 51.
IEC 61010-2-120:2016…
Metallic materials — Charpy pendulum impact test — Part 2: Verification of testing machines
ISO 148-2:2016 covers the verification of pendulum-type impact testing machines, in terms of their constructional elements, their overall performance and the accuracy of the results they produce. It is applicable to machines with 2 mm or 8 mm strikers used for pendulum impact tests carried out, for instance, in accordance with ISO 148‑1.
It can be applied to pendulum impact testing machines of…
Mechanical vibration — Laboratory method for evaluating vehicle seat vibration — Part 1: Basic requi...
ISO 10326-1:2016 specifies basic requirements for the laboratory testing of vibration transmission through a vehicle seat to the occupant. These methods for measurement and analysis make it possible to compare test results from different laboratories for equivalent seats.
It specifies the test method, the instrumentation requirements, the measuring assessment method and the way to report the test…
Metallic materials — Method of constraint loss correction of CTOD fracture toughness for fracture as...
In fracture assessments of steel structures containing cracks, it has generally been assumed that the fracture resistance of fracture toughness specimens is equal to the fracture resistance of structural components. However, such an assumption often leads to excessively conservative fracture assessments. This is due to a loss of plastic constraint in structural components, which are subjected…
Plastics — Determination of aerobic biodegradation of non-floating plastic materials in a seawater/s...
ISO 19679:2016 specifies a test method to determine the degree and rate of aerobic biodegradation of plastic materials when settled on marine sandy sediment at the interface between seawater and the seafloor, by measuring the evolved carbon dioxide.
This test method is a simulation under laboratory conditions of the habitat found in different seawater/sediment-areas in the sea, e.g. in a benthic…
Plastics — Determination of aerobic biodegradation of non-floating plastic materials in a seawater/s...
ISO 18830:2016 specifies a test method to determine the degree and rate of aerobic biodegradation of plastic materials when settled on marine sandy sediment at the interface between seawater and the seafloor, by measuring the oxygen demand in a closed respirometer.
Measurement of aerobic biodegradation can also be obtained by monitoring the carbon dioxide evolution. This is not in the scope of…
Acoustics — Laboratory measurement of sound insulation of building elements — Part 1: Application ru...
ISO 10140-1:2016 specifies test requirements for building elements and products, including detailed requirements for preparation, mounting, operating and test conditions, as well as applicable quantities and additional test information for reporting. The general procedures for airborne and impact sound insulation measurements are given in ISO 10140-2 and ISO 10140-3, respectively.
Test methods for repair materials for water-leakage cracks in underground concrete structures — Part...
ISO/TS 16774:2016 specifies a laboratory test method for indirectly measuring the adhesion performance of repair material to wet concrete crack surfaces by qualitatively, as a pass/fail at predetermined time, against predetermined amount of weight exerted on the repair material adhesion.
NOTE ISO/TS 16774-4:2016 classifies and categorizes materials that are tested into families of…
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-0...
IEC 61010-2-011:2016 specifies particular safety requirements for the following types a) to c) of electrical equipment and their accessories, wherever they are intended to be used, whenever that equipment incorporates REFRIGERATING SYSTEMS whether an integral part of, or remote to the equipment and the equipment is in direct control of the REFRIGERATING SYSTEM. This Part 2 details all the…
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-0...
IEC 61010-2-012:2016 specifies safety requirements for electrical equipment and their accessories within the categories a) through c), wherever they are intended to be used, whenever that equipment incorporates one or more of the following characteristics:
- A REFRIGERATING SYSTEM that is acted on or impacted by an integral heating function such that the combined heating and cooling system…
