Rechercher

1.1 Scope 1.1.1 Equipment included in scope [Add the following paragraph] This Standard covers equipment that is intended to be installed or used in accordance with CSA C22.1, Canadian Electrical Code, Part I. 1.1.2 Equipment excluded from scope [Replace the third dashed item with the following] – safety ACTUATORs and SOLENOIDs performing a safety function as covered by CSA C22.2 No. 139;

1.1 Scope 1.1.1 Equipment included in scope [Add the following paragraph] This Standard covers equipment that is intended to be installed or used in accordance with CSA C22.1, Canadian Electrical Code, Part I.

This clause of Part 1 is applicable, except as follows. 1.1.1 Equipment included in scope Replacement: • This part of IEC 61010 specifies safety requirements and related verification tests for any product performing the function of control equipment and/or their associated peripherals. In addition, these products have as their intended use the command and control of machines, automated…

ISO 3822-3:2018 specifies the mounting and operating conditions to be used for in-line valves and appliances which control the flow, pressure or temperature of the water in water supply installations, when measuring noise emission resulting from water flow. ISO 3822-3:2018 is applicable to in-line valves and appliances of maximum nominal size DN 32 and to systems in which the maximum water flow…

ISO 20870:2017 specifies laboratory procedures which are intended to imitate the effects of naturally occurring reactions. The physical properties of interest are measured before and after the application of the specified treatments. The effect of the ageing procedures on any of the physical properties of the material can be examined.

ISO 389-1:2017 specifies a standard reference zero for the scale of hearing threshold level applicable to pure-tone air conduction audiometers, to promote agreement and uniformity in the expression of hearing threshold level measurements throughout the world. ISO 389-1:2017 states the information in a form suitable for direct application to the calibration of audiometers, that is, in terms of the…

IEC 61340-4-3:2017 describes a test method for determining the electrical resistance of footwear (shoes, slippers or booties) used in the control of electrostatic potential on people. This document is suitable for use by the manufacturer of footwear as well as the end user. A method for measuring the electrical resistance of footwear alone is described and serves as a qualification test or an…

ISO 14688-2:2017 specifies the basic principles for classification of those material characteristics most commonly used for soils for engineering purposes. It is intended to be read in conjunction with ISO 14688‑1, which gives rules for the identification and description of soils. The relevant characteristics could vary and therefore, for particular projects or materials, more detailed…

ISO 5393:2017 specifies a laboratory performance test method for power assembly tools (referred throughout the document as "tool") for installing threaded fasteners. ISO 5393:2017 provides a method for the measurement of torque repeatability (scatter) - over a range of torque rates as specified in this document, - over a range of torque adjustment as defined by the…

ISO 10619-2:2017 specifies two methods for measuring the stiffness and one method for the determination of the flexibility of rubber and plastics hoses and tubing when they are bent to a specific radius at sub-ambient temperatures. Method A is suitable for non-collapsible rubber and plastics hoses and tubing with a bore of up to and including 25 mm. This method provides a means of measuring the…