Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-0...
Applies to hand-held and hand-manipulated CURRENT CLAMPS. These
CURRENT CLAMPS are for use in the measurement of current without
interruption of the current path of the circuit in which it is
measured. They may be stand-alone CURRENT CLAMPS which are
themselves within the scope of part 1, or accessories to other
equipment within the scope of part 1.
This standard does not apply to current…
ISO 12710 describes a set of procedures for the measurement of any performances in an ultrasonic test instrument that has a display screen.
This International Standard establishes the procedures for measuring performance characteristics of components of pulse-echo ultrasonic non-destructive testing instruments including both analog and digital type instruments with screen displays. The aim is to…
Air quality — Evaluation of the suitability of a measurement procedure by comparison with a required...
This International Standard specifies, for the field of air quality measurement procedures, the:
estimation of measurement uncertainty from actual or claimed values of all important performance characteristics of a method under stationary conditions; assessment of whether or not specified values for these performance characteristics comply with the required quality of a measured value at a…
Electromagnetic Compatibility (EMC) - Part 4-17: Testing and Measurement Techniques - Ripple on d.c....
This National Standard of Canada is equivalent to International Standard CEI/IEC 61000-4-17:1999 (first edition, 1999-06), including Amendment 1:2001.
1 Scope
This part of IEC 61000 defines test methods for immunity to ripple at the d.c. input power port of electrical or electronic equipment.
This standard is applicable to low-voltage d.c. power ports of equipment supplied by external…
Road vehicles — Braking systems — Temperature measuring methods
ISO/PAS 12158 presents methods for measuring the temperature of braking systems in road vehicles. It is applicable to both disc and drum brakes fitted on passenger cars and commercial vehicles, and its methods are suitable for either dynamometer tests in the laboratory or vehicle tests on road and track.
Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient ...
This part of ISO 10846 specifies a method for determining the dynamic transfer stiffness for translations of resilient supports, under specific preload. The method concerns the laboratory measurements of vibration transmissibility and is called the indirect method. This method is applicable to test elements with parallel flanges.
Measurements for translations normal and transverse to the flanges…
Rubber condoms for clinical trials — Measurement of physical properties
This International Standard is intended as a guideline for clinical researchers working with condoms. It suggests a
series of laboratory tests to be conducted on the products to be used in any clinical investigation, so that it will be
easier to relate the clinical results to the design and quality of the condoms used.
This International Standard is not applicable to the design of clinical…
Electrical equipment for measurement, control and laboratory use - EMC requirements
specifies minimum requirements for immunity and emissions regarding electromagnetic compatibility (EMC) for electrical equipment, operating from a supply of less than 1 000 V a.c. or 1 500 V d.c. or from the circuit being measured, intended for professional, industrial-process and educational use, including equipment and computing devices. The contents of the corrigendum of July 2002 have been…
