Rechercher

This report is a Technical Report and is of a purely informative nature and is therefore by itself not to be regarded as an International Standard. It is to assist users of the standard with determining and recording verification of conformity of the equipment under test with the requirements of: IEC 61010-1: 2001 2nd edition The protocol for completion of this report is contained in publication…

This report is a Technical Report and is of a purely informative nature and is therefore by itself not to be regarded as an International Standard. It is for use by users to assist them with determining and recording verification of conformity of the equipment under test with the requirements of: IEC 61010-2-045: 2000 and EC 61010-1: 1990 + amendment 1:1992 + amendment 2:1995

ISO 11990:2003 specifies a method of testing the continuous wave (cw) laser resistance of the shaft of a tracheal tube. Other components of the system, such as the inflation system and cuff, are outside the scope of ISO 11990:2003. The specified test method shall be used to measure and describe the properties of materials, products or assemblies in response to heat and flame under controlled…

1. SCOPE 1.1 This procedure defines the long-term thermal resistance (LTTR) of a foam product as the value measured after 5-year storage in a laboratory environment and provides means for its prediction based on an accelerated laboratory test. 1.2 This procedure, based on ASTM standard test methods C 1303 and C 518, can be applied to a wide range of preformed as well as field applied…

ISO 14507:2003 specifies three methods for the pretreatment of soil samples in the laboratory prior to the determination of organic contaminants: if volatile organic compounds are to be measured;if moderately volatile to non-volatile organic compounds are to be measured, if the result of the subsequent analysis must be accurate and reproducible, and if the sample contains particles larger than 2…

ISO 5007:2003 specifies, in accordance with ISO 10326-1, a laboratory method for measuring and evaluating the effectiveness of the suspension of operator seats on agricultural wheeled tractors. It also specifies acceptance criteria based on the test results, while defining the input spectral classes relating to three classes of agricultural tractor with rubber tyres, unsprung rear axles and no…

ISO 15767:2003 provides recommendations for controlling the analytical uncertainty associated with aerosol collection medium instability, where collection medium or substrate includes any article used to collect particles (e.g. filter or foam material) as well as those supporting elements which must be analysed by weighing. ISO 15767:2003 is applicable to results compiled both from the literature…

1. SCOPE 1.1 This method is applicable to the finished surface or covering of a floor extending to a maximum depth of 65 mm. It may also be applied to materials that cannot conveniently be tested in a ceiling mounted configuration. Thermoplastic and loose fill materials might be included in this category. 1.2 The primary purpose of the test is to determine the comparative burning…

1. SCOPE 1.1 This method of test for surface burning characteristics of building materials is applicable to any type of building material that, by its own structural qualities or the manner in which it is applied, is capable of supporting itself in position or may be supported in the test furnace to a thickness comparable to its recommended use. NOTE: For materials which cannot be so…