Rechercher

IEC 60695-7-1:2010 provides guidance on the factors which affect the toxic hazard from fires involving electrotechnical products, and provides information on the methodologies recommended by ISO TC 92 (SC 3) for estimating and reducing the toxic hazard from fires, as expressed in ISO 19706, ISO 13344 and ISO 13571. There is no single test to realistically assess toxic hazard in fires. Small-scale…

IEC 61010-2-030:2010 specifies safety requirements for testing and measuring circuits which are connected for test or measurement purposes to devices or circuits outside the measurement equipment itself. These include measurement circuits which are part of electrical test and measurement equipment, laboratory equipment, or process control equipment. The existence of these circuits in equipment…

IEC 61010-1:2010 specifies general safety requirements for the following types of electrical equipment and their accessories, wherever they are intended to be used. a) Electrical test and measurement equipment b) Electrical industrial process-control equipment c) Electrical laboratory equipment This third edition cancels and replaces the second edition published in 2001. It constitutes a…

ISO 9239-1:2010 specifies a method for assessing the wind-opposed burning behaviour and spread of flame of horizontally mounted floorings exposed to a heat flux radiant gradient in a test chamber, when ignited with pilot flames. This method is applicable to all types of flooring. e.g. textile carpet, cork, wood, rubber and plastics coverings as well as coatings. Results obtained by this method…

IEC/TR 62617:2010(E) applies to uncertainty reporting of home laundry electrical appliances. It allows to estimate the uncertainty of a measured result and to predict the range of values that may be measured when the same appliance is measured in another laboratory following the same measurement method.

ISO 4787:2010 provides methods for the testing, calibration and use of volumetric instruments made from glass in order to obtain the best accuracy in use. The International Standards for the individual volumetric instruments (ISO 385, ISO 646, ISO 835, ISO 1042 and ISO 4788) include clauses on the definition of capacity; these clauses describe the method of manipulation in sufficient detail to…

ISO 25337:2010 describes a statistical, so-called single-measurement, model for using single measurements for production quality control purposes at a producer's manufacturing site, even if a standard test method specifies replicate measurements. The statistical model is also applicable to test methods which call for repeated operations. A general approach to the precision statement in test…

Preface This is the first edition of CAN/CSA-C22.2 No. 80601-2-59, Medical electrical equipment - Part 2-59: Particular requirements for the basic safety and essential performance of screening thermographs for human febrile temperature screening, which is an adoption without modification of the identically titled IEC (International Electrotechnical Commission) Standard 80601-2-59 (first…

IEC 60904-10:2009 describes procedures used to determine the degree of linearity of any photovoltaic device parameter with respect to a test parameter. It is primarily intended for use by calibration laboratories, module manufacturers and system designers. The main technical changes with regard to the previous edition are as follows: - added clause for two-lamp method for Isc linearity; - removed…