Rechercher

1 Scope This National Standard of Canada defines equipment requirements, performance criteria, and operating and testing procedures for the implementation of a vapour control system (VCS) in gasoline distribution networks including terminals, bulk plants, service stations and cargo tanks, commonly known as Stage I (see Figure 1 for a schematic representation). This standard does not include…

1 Scope and object This clause of Part 1 is applicable except as follows: 1.1.1 Equipment included in scope Replacement: Replace the text with the following: This group safety publication is primarily intended to be used as a product safety standard for the products mentioned in the scope, but shall also be used by technical committees in the preparation of their publications for products…

This document specifies the requirements for competence to carry out reference measurement procedures in laboratory medicine, using the requirements of ISO/IEC 17025:2017 as a normative reference and listing additional requirements for calibration laboratories to perform their tasks adequately. The relationship between clauses in this document and ISO/IEC 17025:2017 are summarized in Annex A.…

This document specifies procedures for the laboratory determination of the total elemental sulfur and the sulfate half-ester content of cellulose nanocrystals (CNCs) by inductively coupled plasma-optical emission spectroscopy and conductometric titration, respectively, including sample preparation, measurement methods and data analysis. This document is applicable to the characterization of CNCs…

This document specifies a test method for measurement of the adhesion strength of hydroxyapatite coatings intended for use on metallic-substrate components of surgical implants. NOTE Requirements for the competence of testing laboratories can be found in ISO/IEC 17025.

This document specifies a general laboratory test method for evaluating the reduction in concentration of VOCs by sorptive building materials. This method applies to boards, wallpapers, carpets, paint products, and other building materials. The sorption of those target compound(s), i.e. VOCs, can be brought about by adsorption, absorption and chemisorption. The performance of the material, with…

This document specifies how screens, furniture and single objects intended for interior use are assessed with regard to sound absorption and specifies the evaluation of sound attenuation for floor screens. It also specifies under which circumstances various interior products for offices, schools and other public spaces are considered as plane absorbers or as discrete single objects. A product…

This document specifies procedures for measuring and reporting the noise emission of information technology and telecommunications equipment. NOTE 1 This document is considered part of a noise test code (see 3.1.2) for this type of equipment and is based on basic noise emission standards (see 3.1.1) ISO 3741, ISO 3744, ISO 3745, ISO 9295 and ISO 11201. The basic emission quantity is the A-…

This document specifies a method for the determination of gross alpha and gross beta activity concentration for alpha- and beta-emitting radionuclides using liquid scintillation counting (LSC). The method is applicable to all types of waters with a dry residue of less than 5 g/l and when no correction for colour quenching is necessary. Gross alpha and gross beta activity measurement is not…

This document specifies a test method for the determination of gross beta activity concentration in non-saline waters. The method covers non-volatile radionuclides with maximum beta energies of approximately 0,3 MeV or higher. Measurement of low energy beta emitters (e.g. 3H, 228Ra, 210Pb, 14C, 35S and 241Pu) and some gaseous or volatile radionuclides (e.g. radon and radioiodine) might not be…