Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test m...
IEC 60695-2-11:2014 specifies a test method on an end product. It is intended to simulate the effects of thermal stresses produced by an electrically heated source to represent a fire hazard. This test method is used to check that, under defined test conditions, an end product exposed to an electrically heated source has either a limited ability to ignite or, if it ignites, a limited ability to…
Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-2...
1 Scope and object
This clause of Part 1 is applicable, except as follows.
1.1.1 Equipment included in scope
Replacement:
This part of IEC 61010 specifies safety requirements and related verification tests for control
equipment of the following types:
– Programmable controllers (PLC and PAC);
– the components of Distributed Control Systems (DCS);
– the components of remote I/O – systems;
–…
Information technology — Security techniques — Test requirements for cryptographic modules
ISO/IEC 24759:2014 specifies the methods to be used by testing laboratories to test whether the cryptographic module conforms to the requirements specified in ISO/IEC 19790:2012/Cor.1:2015. The methods are developed to provide a high degree of objectivity during the testing process and to ensure consistency across the testing laboratories.
ISO/IEC 24759:2014 also specifies the requirements for…
Information technology - Security techniques - Test requirements for cryptographic modules
ISO/IEC 24759:2014 specifies the methods to be used by testing laboratories to test whether the cryptographic module conforms to the requirements specified in ISO/IEC 19790:2012/Cor.1:2015. The methods are developed to provide a high degree of objectivity during the testing process and to ensure consistency across the testing laboratories.
ISO/IEC 24759:2014 also specifies the requirements for…
Radiological protection — Performance criteria for service laboratories performing biological dosime...
ISO 19238:2014 provides criteria for quality assurance and quality control, evaluation of the performance, and the accreditation of biological dosimetry by cytogenetic service laboratories.
ISO 19238:2014 addresses
a) the confidentiality of personal information, for the customer and the service laboratory,
b) the laboratory safety requirements,
c) the calibration sources and calibration…
Electromagnetic compatibility (EMC) — Part 4-18: Testing and measurement techniques — Damped oscilla...
1 Scope and object
This part of IEC 61000-4 relates to the immunity requirements and test methods for electrical
and electronic equipment, under operational conditions, with regard to:
a) repetitive damped oscillatory waves occurring mainly in power, control and signal cables
installed in high voltage and medium voltage (HV/MV) substations;
b) repetitive damped oscillatory waves occurring…
1.1 General
This Standard specifies requirements for
a) mortar for use in bedding, jointing, and bonding of masonry units; and
b) grout for use in filling core, cell, or cavity space in unit masonry construction.
Notes:
1) The term “unit masonry” refers to masonry construction using clay (shale), calcium silicate (sand-lime), or
concrete masonry units, with individual units not more than 200 mm…
Plume scavenging in surgical, diagnostic, therapeutic, and aesthetic settings
Scope
1.1
This Standard applies to systems and equipment used to capture and evacuate plume. It applies to all settings where such systems and equipment are used, including, but not limited to, the following:
a) surgical facilities;
b) dental clinics;
c) medical offices;
d) veterinary facilities;
e) laboratories and other research and testing facilities;
f) cosmetic…
Soils – Determination of the Water Content-Dry Density Relation – Standard Compaction Effort Test(60...
1 PURPOSE AND SCOPE
This standard specifies the test method to determine the relation between the water content and the
dry density of soil and soil aggregates mixes when they are compacted in a standard mould by a
2,495 kg rammer dropped from a height of 305 mm. Three methods are used to determine this
relation (see Chapter 5).
NOTE — The laboratory compaction test methods described in this…
Soils – Determination of the Water Content-Dry Density Relation – Modified Compaction Effort Test(27...
1 PURPOSE AND SCOPE
This standard specifies the test method to determine the relation between the water content and the
dry density of soil and soil aggregates mixes when they are compacted in a standard mould by a
4,536 kg rammers dropped from a height of 457 mm. Three methods are used to determine this
relation (see Chapter 5).
NOTE — The laboratory compaction test methods described in…
