Rechercher

ISO/TS 17822-1:2014 is intended for ? IVD medical device manufacturers, medical laboratories, and research and development laboratories that develop nucleic acid-based qualitative in vitro diagnostic examination procedures for the detection and identification of microbial pathogens in human specimens, and ? medical laboratories that perform nucleic acid-based in vitro diagnostic examinations…

ISO 24338:2014 specifies two methods (A and B) for measuring abrasion of laminate floor covering elements. The tests described measure the ability of the surface layer to resist abrasive wear-through. Abrasion, according to method A, is achieved by rotating a test specimen in contact with a pair of loaded cylindrical wheels covered with specified abrasive paper. The resistance to wear, according…

1 Scope and object This clause of Part 1 is applicable, except as follows: 1.1.1 Equipment included in scope Replacement: Replace the text with the following: This part of IEC 61010 specifies particular safety requirements for CABINET X-RAY SYSTEMS. A CABINET X-RAY SYSTEM is a system that contains an X-ray tube installed in a cabinet which, independently of existing architectural…

Ce document constitue la norme harmonisée au Groupe CSA et aux UL visant les équipements des technologies de l’audio/vidéo, de l’information et de la communication — Partie 1 : Exigences de sécurité. Il s’agit de la deuxième édition de la CAN/CSA-C22.2 nº 62368-1 et de la deuxième édition de l’UL 62368-1. Cette édition de la CAN/CSA-C22.2 nº 62368-1 remplace l’édition précédente publiée en…

This is the third edition of C22.2 No. 61010-2-032, Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-032: Particular requirements for hand-held and handmanipulated current sensors for electrical test and measurement, which is an adoption, with Canadian deviations, of the identically titled IEC (International Electrotechnical Commission)…

ISO 19901-8:2014 specifies requirements, and provides recommendations and guidelines for marine soil investigations regarding: a) objectives, planning and execution of marine soil investigations; b) deployment of investigation equipment; c) drilling and logging; d) in situ testing; e) sampling; f) laboratory testing; and g) reporting. Rock materials are only covered by ISO…

ISO 17892-1:2014 specifies a method of determining the water content of soils. It is applicable to the laboratory determination of the water (also known as moisture) content of a soil test specimen by oven-drying within the scope of geotechnical investigations. The water content is required as a guide to the classification of natural soils and as a control criterion in re-compacted soils, and is…

ISO 17892-2:2014 specifies three methods for the determination of the bulk density of soils, comprising: a) linear measurement method; b) immersion in fluid method; c) fluid displacement method. ISO 17892-2:2014 is applicable to the laboratory determination of the bulk density of soil within the scope of geotechnical investigations. The linear measurement method is suitable for the determination…

IEC 61340-4-8:2014 provides a test method for evaluating the performance of electrostatic discharge shielding bags tested according to the requirements of IEC 61340-5-3. The design voltage for the test apparatus is 1 000 V d.c. The test method presented in this standard can also be applied to packaging other than shielding bags. The purpose of this standard is to ensure that testing laboratories…