Rechercher

ISO/TS 16774-3:2016 specifies a laboratory test method on the quantitative determination of repair material's performance and resistance against erosion and wash out due to underground water flow.

ISO/TS 16774:2016 specifies a laboratory test method for indirectly measuring the adhesion performance of repair material to wet concrete crack surfaces by qualitatively, as a pass/fail at predetermined time, against predetermined amount of weight exerted on the repair material adhesion. NOTE ISO/TS 16774-4:2016 classifies and categorizes materials that are tested into families of…

IEC 61010-2-011:2016 specifies particular safety requirements for the following types a) to c) of electrical equipment and their accessories, wherever they are intended to be used, whenever that equipment incorporates REFRIGERATING SYSTEMS whether an integral part of, or remote to the equipment and the equipment is in direct control of the REFRIGERATING SYSTEM. This Part 2 details all the…

IEC 61010-2-012:2016 specifies safety requirements for electrical equipment and their accessories within the categories a) through c), wherever they are intended to be used, whenever that equipment incorporates one or more of the following characteristics: - A REFRIGERATING SYSTEM that is acted on or impacted by an integral heating function such that the combined heating and cooling system…

IEC 61010-2-202:2016 specifies the safety requirements for electric ACTUATORs and SOLENOIDs, as applied to valves, intended to be installed in an industrial process or discrete control environment. This publication is to be read in conjunction with IEC 61010-1:2010.

ISO 17294-2:2016 specifies a method for the determination of the elements aluminium, antimony, arsenic, barium, beryllium, bismuth, boron, cadmium, caesium, calcium, cerium, chromium, cobalt, copper, dysprosium, erbium, gadolinium, gallium, germanium, gold, hafnium, holmium, indium, iridium, iron, lanthanum, lead, lithium, lutetium, magnesium, manganese, mercury, molybdenum, neodymium, nickel,…

This is the second edition of CAN/CSA-C22.2 No. 61010-2-040, Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials, which is an adoption, with Canadian deviations, of the identically titled IEC (International Electrotechnical Commission) Standard…

1 Scope This part of ISO 10079 specifies safety and performance requirements for electrically powered medical and surgical suction equipment. It applies to equipment used in health care facilities such as hospitals, for domiciliary care of patients and for field and transport use. This part of ISO 10079 does not apply to the following: a) central power supply (by vacuum/compressed air…

ISO 7206-13:2016 describes a method of determining the torque required, under specified laboratory conditions, to loosen the fixation of the head of hip joint prostheses in which the head is not intended to rotate relative to the neck. It applies to the femoral component of total or partial hip joint replacements in which the head and neck/stem (in the following referred to as cone) are secured…

ISO 16900-5:2016 specifies the characteristics of breathing machines, metabolic simulators, RPD head forms/torso, RPD tools and RPD verification tools that are common to RPD test laboratories. Standardization of these items is essential for the standardization of the test methods. Standardization of the RPD verification tools is essential for demonstrating the delivery of comparable results in…