Rechercher

This document specifies a method for determining the total content (solvent extractable) of the following bisphenols in chemicals for the leather tanning industry: —     bisphenol A; —     bisphenol AF; —     bisphenol B; —     bisphenol F; —     bisphenol S. This method requires the use of liquid chromatography (LC) with either a single quadrupole mass spectrometer (MS), a triple quadrupole mass…

This document defines the requirements for competence of individuals who provide advice, guidance, and assurance on processes to identify, assess, control, and monitor the risks associated with hazardous biological materials in a laboratory or other related organization that handles, stores, transports, or disposes of biological materials that can be potentially hazardous for people, animals,…

This document establishes a uniform method of laboratory testing for the determination of airflow propelled through an open personnel door by a positive pressure ventilator. NOTE            The test described by this document is not entirely in accordance with ISO 5801, though it references several subclauses of ISO 5801 (such as the measurement of pressure and airflow). This document does not…

This document specifies the detection of Clostridium (C.) perfringens. This document is applicable to: —     products intended for human consumption; —     products intended for animal feeding; —     environmental samples in the area of food and feed production and handling; —     samples from the primary production stage. This horizontal method was originally developed for the examination of all…

This document specifies the testing procedures for the instrumental determination of the opacity of tissue paper or tissue products by diffuse reflectance using a paper backing. This document contains specific instructions for the preparation of test pieces of single-ply and multi-ply products, where special preparation/procedures might be necessary. It can be used to determine the opacity of…

Scope 1.1 These requirements cover Type I commercial kitchen exhaust hoods intended for placement over commercial cooking equipment. Exhaust hoods with and without exhaust dampers are covered by these requirements. 1.2 Exhaust hoods with and without exhaust fire actuated fire dampers are covered by these requirements. 1.3 Exhaust hoods are evaluated relative to minimum exhaust air flow…

This document specifies a method for the determination of the static vulcanized adhesion strength of rubber compounds to rigid materials. The test piece is composed of two conical ends of the rigid material, joined by a cylinder of rubber. The adhesion is obtained by a bonding system which can include not only the rigid material and the rubber compound, but other elements such as thin alloy…

This document specifies two methods for determining the adhesion strength of vulcanized rubber to wire cord which is embedded in the rubber. The two methods do not necessarily give the same results. They are applicable primarily to test pieces prepared in the laboratory under standard conditions and used for the development and control of materials and processes utilized in the manufacture of…

This document provides the guidelines, minimum requirements and performance characteristics intended to guarantee that manufactured systems intended for on-site/field use (i.e. outside the laboratory) provide reliable and reproducible results. This document specifies the requirements for technologies that enable on-site detection and quantification of Legionella spp. and L. pneumophila using a…

This document specifies the general requirements for sampling, preservation, handling, transport and storage of all water samples for physicochemical, chemical, hydrobiological and microbiological analyses and determination of radiochemical analytes and activities. Guidance on the validation of storage times of water samples is provided in ISO/TS 5667-25. This document is not applicable to water…