Rechercher

1. Scope 1.1 This Standard pertains to temperature-raising water baths used in biomedical laboratories. 1.2 This Standard includes construction, performance, and disclosure requirements for water baths.

Specifies a laboratory method of test. This test is designed to test for tightness, heat insulation and mechanical strength under standard conditions and for durability against treatment such as may occur during sweeping. This test provides information on the performance under a set of prescribed temperatur and flow rate conditions, but does not provide information appropriate to specific heating…

Is limited to the furnishing and beating of the stock, the with-drawal and distribution of the samples, and the beating equipment. The beating is a preliminary step in testing the physical properties of the pulp.

Is limited to the furnishing and beating of the stock, the with-drawal and distribution of the samples, and the beating equipment. The beating is a preliminary step in testing the physical properties of the pulp.

Is limited to the furnishing and beating of the stock, the withdrawal and distribution of the samples, and the beating equipment. The beating is a preliminary step in testing the physical properties of the pulp.

Applies to surgeons' and laboratory coats made from preshrunk, bleached cotton drill fabric. They shall not be worn in an environment requiring lint-free clothing.

In addition to above, applicable up to 100 kHz. Resistor characterization.

Specifies the method which is essentially the same as that described in CISPR publication 11, sub-clause 5.2.2. With this method, emphasis has been laid on simplicity and reproducibility, rather than on rigorous scientific method. lt has been purposely developed for use in an ordinary laboratory room to avoid the use of an expensive anechoic room. The method is intended for type tests but it may…