Corrugating medium — Determination of the flat crush resistance after laboratory fluting
Cancels and replaces the first edition (1985). Specifies two methods for the determination of the flat crush resistance of corrugating medium after laboratory fluting. The procedures are applicable to any paper intended to be used, after fluting, in the manufacture of corrugated fibreboard.
Motorcycles and mopeds — Pollution tests — Chassis dynamometer bench
Specifies the performance of a universal chassis dynamometer bench and a simplified bench, with a single roller, for laboratory tests on mopeds and motorcycles. Also gives the design characteristics of a bench. The bench is used to check exhaust gas emissions.
Medical diagnostic X-ray equipment - Radiation conditions for use in the determination of characteri...
Deals with methods for generating radiation beams with radiation conditions which can be used under test conditions typically found in test laboratories or in manufacturing facilities for the determination of characteristics of medical diagnostic X-ray equipment.
Soil quality — Guidance on laboratory testing for biodegradation of organic chemicals in soil under ...
Provides guidance on the selection and conduct of appropriate test methods for the determination of biodegradation of organic chemicals in aerobic soils. Does not describe any specific test method.
Thermal insulation — Determination of steady-state thermal transmission properties — Calibrated and ...
Lays down the principles for the design of the apparatus and minimum requirement that shall be met for determination of the laboratory steady-state thermal transmission properties of building components and similar components for industrial use. Does not specify a particular design. Describes also the apparatus, measurement technique and necessary data reporting. Primarily intended for laboratory…
Dental Rotary Instruments - Nominal Diameters and Designation Code Number
This National Standard of Canada is equivalent to International Standard ISO
2157:1992.
1 Scope
This International Standard specifies the nominal diameters of the working
parts of dental rotary instruments, for example burs, laboratory burs, grinding
instruments, diamond instruments, mandrels, etc. and the corresponding
designation. It does not cover the diameters of root canal…
This National Standard of Canada is equivalent to International Standard ISo
7786:1990.
1 Scope
This International Standard specifies the dimensional and other requirements
for grinding instruments used in the dental laboratory.
Other characteristics of dental abrasive instruments are not covered by this
International Standard. These will be dealt with in a future International…
Rubber latex — Determination of density between 5 degrees C and 40 degrees C
Cancels and replaces the first edition (1974) and amendment 1 (1994). Specifies a method for the determination of the density of natural rubber latex concentrate between the temperatures of 5 °C und 40 °C. Intended for use when density determinations are used to calculate the mass of a measured volume of latex in locations where it is not practical to weigh directly or to control the temperature…
