Biological Containment Cabinets (Class I and II): Installation and Field Testing
1. Scope
1.1
This Standard applies to the installation and testing of Class I and Ii
biological containment cabinets. Such cabinets are designed to control and
contain particulates and aerosols generated by routine laboratory
manipulations.
This Standard provides criteria for testing and uniform procedures for
conducting the identified field tests. The tests are intended to provide…
Evaluation of Single Use Medical Sharps Containers for Biohazardous and Cytotoxic Waste
1. Scope
1.1
This Standard applies to the material of construction, the physical integrity, and the labelling requirements of biohazardous and cytotoxic medical sharps containers.
1.2
This Standard applies to medical sharps containers intended for single use.
1.3
This Standard states test criteria for the evaluation of the following characteristics of sharps containers:
(a)…
Methods of Testing Petroleum and Associated Products
Test for Ethyl Mercaptan Odourant in Propane, ...
1. SCOPE
1.1 This method is intended for the semi-quantitative (i.e.±25%)
determination of ethyl mercaptan odourant (within the range of 5 to 85
mg/L) in liquid propane. It is important to confirm that recently
stenched propane is odourized to the required level. The method is
intended for field application and may be suitable for use by non-…
Nuclear instrumentation - MCA histogram data interchange format for nuclear spectroscopy
Provides a format for data interchange that can be used to transfer multichannel pulse height data between laboratories and to distribute this data for testing purposes.
Specifies two laboratory methods for testing certain essential strength characteristics of wheels intended for road use on passenger cars as defined in ISO 3833. The test methods are a dynamic cornering fatigue test and a dynamic radial fatigue test.
Specifies three laboratory methods for testing certain essential strength characteristics of disc wheels, spoke wheels and demountable rim wheels intended for road use on commercial vehicles, buses, trailers and multipurpose passenger vehicles, as defined in ISO 3833. The test methods are dynamic cornering fatigue tests for disc wheels, dynamic radial fatigue tests for disc wheels and wheels with…
Requirements for the Competence of Environmental Laboratories
1. Scope
1.1
This Standard applies to environmental analytical laboratories carrying out
testing associated with the measurement of chemical, radiochemical, biological,
toxicological and physical characteristics of environmental samples.
Note: Toxicological characteristics, as used in the above context, exclude
characteristics determined by mammalian effects testing.
1.2
This Standard…
1. Scope
1.1
This Standard applies to vacuum breakers for use on laboratory faucets.
1.2
Laboratory faucet vacuum breakers are installed on the discharge side of the
last control valve and are not intended for use under constant pressure
conditions.
Textile Test Methods: Textile Fabrics - Burning Behaviour - Measurement of Flame Spread Properties o...
This National Standard of Canada is equivalent to International Standard ISO
6941:1984.
1 Scope and field of application
This International Standard specifies a method for the measurement of flame
spread properties of vertically oriented textile fabrics intended for apparel,
curtains and draperies in the form of single- or multi-component (coated,
quilted, multilayered, sandwich…
Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate measures...
Specifies four intermediate measures due to changes in observation conditions (time, calibration, operator and equipment) within a laboratory. These intermediate measures can be established by an experiment within a specific laboratory or by an interlaboratory experiment. Furthermore, discusses the implications of the definitions of intermediate precision measures, presents guidance on the…
