Rechercher

1 Scope 1.1 This Standard applies to the material of construction, the physical integrity, and the labelling requirements of biohazardous and cytotoxic medical sharps containers. 1.2 This Standard applies to medical sharps containers intended for single use. 1.3 This Standard specifies test criteria for the evaluation of the following characteristics of sharps containers: a)…

This National Standard of Canada is equivalent to International Standard ISO/IEC 14515-1:2000/IEEE 2003.1, 1992 (first edition, 2000-12-15). 1.1 Scope This standard defines the general requirements and test methods for measuring conformance to ISO/IEC 9945-1 :1990 (IEEE Std 1003.1-1990) hereinafter referred to as .POSIX.1. {3}.1 It also defines the test assertions for measuring conformance…

ISO 10416:2002 provides procedures for the laboratory testing of both drilling fluid materials and drilling fluid physical, chemical and performance properties. It is applicable to both water-based and oil-based drilling fluids, as well as the base or make-up fluid. It is not intended as a detailed manual on drilling fluid control procedures. Recommendations regarding agitation and testing…

ISO 15011-3 defines a laboratory method for evaluating ozone emissions generated during arc welding by measuring ozone concentrations at fixed points around a stationary welding arc. The results may be used to compare the effect of welding parameters, processes, etc. on ozone generation and hence to predict changes in workplace exposure under similar working conditions.

ISO 15705:2002 specifies a method for the determination of the chemical oxygen demand (ST-COD) using the sealed tube method. The test is empirical and is applicable to any aqueous sample, which includes all sewage and waste waters. The method is applicable to undiluted samples having ST-COD values up to 1 000 mg/l and a chloride concentration not exceeding 1 000 mg/l. Samples with higher ST-COD…

ISO 5264-2:2002 specifies a method, using a PFI mill, for the laboratory beating of pulp. The description is limited to the sampling and beating of the pulp, the withdrawal and distribution of samples, and the beating equipment. NOTE Beating is a preliminary step in testing the physical properties of pulp. In principle, this method is applicable to all kinds of chemical and semi-chemical pulps.…

ISO 15797 specifies test procedures and equipment which can be used in the evaluation of cotton, polyester/cotton and reverse blend workwear intended to be industrially laundered. They serve as a basis for testing relevant properties such as dimensional stability, colour fastness, creasing and seam puckering. This International Standard does not provide instructions and specifications for the…

This International Standard specifies a laboratory test method for determining the resistance of photographic emulsions or gelatin backings to abrasion damage during processing. This method may be used to determine the effects of variations in processing solutions, gelatin layer properties, processing solution temperatures and times, or a combination of these factors, on the wet scratch…

ISO 17155:2002 specifies a test method for determining the activity of the active aerobic, heterotrophic microbial biomass in soils. This method is applicable to the monitoring of soil quality and to the evaluation of the ecotoxic potential of soils and soil materials. It is also applicable to soils that are contaminated experimentally in the field or in the laboratory (chemical testing) and for…

ISO/TS 11155-2:2002 specifies a test comprising methods for measuring the dynamic gas adsorption of air filters in the passenger compartments of road vehicles. These laboratory test methods are applicable to air filters that improve air quality by reducing concentrations of gaseous, odorous or hazardous components from ambient or recirculated air, or both, in the vehicle cabin. They provide a…