Rechercher

This report is a Technical Report and is of a purely informative nature and is therefore by itself not to be regarded as an International Standard. It is for use by users to assist them with determining and recording verification of conformity of the equipment under test with the requirements of: IEC 61010-2-045: 2000 and EC 61010-1: 1990 + amendment 1:1992 + amendment 2:1995

ISO 18922:2002 is applicable to evaluating the scratch resistance of dry, processed photographic film. It specifies two test methods for evaluating the scratch resistance on either the emulsion or the base side. The two test methods usually give comparable results. It provides empirical laboratory tests made under controlled conditions, but does not necessarily predict the actual scratch…

Provides details of the tests necessary to verify conformance to all mandatory specifications given in IEC 61672-1:2002 for conventional sound level meters, integrating-averaging sound level meters and integrating sound level meters. Pattern evaluation tests apply for each channel of a multi-channel sound level meter, as appropriate. Tests and test methods are applicable to class 1 and class 2…

ISO 11990:2003 specifies a method of testing the continuous wave (cw) laser resistance of the shaft of a tracheal tube. Other components of the system, such as the inflation system and cuff, are outside the scope of ISO 11990:2003. The specified test method shall be used to measure and describe the properties of materials, products or assemblies in response to heat and flame under controlled…

ISO 15384:2003 specifies methods of test and minimum performance requirements for protective clothing to be worn in wildland firefighting and associated activities. This clothing is not intended to provide protection during fire entrapment. ISO 15384:2003 applies to the general design of the garment, the minimum level of performance for the materials employed and the methods of test to determine…

This National Standard of Canada is based on International Standard ISO 10079-1:1999 (second edition, 1999-08-15). 1 Scope This part of ISO 10079 specifies minimum safety and performance requirements for medical and surgical suction equipment (see Figure 1) for health care facilities such as hospitals, for domiciliary care of patients and for field and transport use. Although such equipment…

1. SCOPE 1.1 This procedure defines the long-term thermal resistance (LTTR) of a foam product as the value measured after 5-year storage in a laboratory environment and provides means for its prediction based on an accelerated laboratory test. 1.2 This procedure, based on ASTM standard test methods C 1303 and C 518, can be applied to a wide range of preformed as well as field applied…

ISO/TR 15655:2003 identifies test methods already in existence and provides guidance on those that need to be developed to characterize the thermo-physical and mechanical properties of structural materials at elevated temperatures for use in fire safety engineering calculations. It is applicable to materials used in load-bearing construction in which structural and thermal calculations might be…

ISO 14507:2003 specifies three methods for the pretreatment of soil samples in the laboratory prior to the determination of organic contaminants: if volatile organic compounds are to be measured;if moderately volatile to non-volatile organic compounds are to be measured, if the result of the subsequent analysis must be accurate and reproducible, and if the sample contains particles larger than 2…