Rechercher

Affiner les résultats
Code de la Classification internationale pour les normes (ICS)
Source
Code de l’organisme d’élaboration de normes (OEN)
Langue
Statut
Code de la Norme nationale du Canada (NNC)
Date de publication

De

à

Affichage 1361 - 1370 de 2402
Rubber, vulcanized or thermoplastic — Determination of shear modulus and adhesion to rigid plates — ...
ISO 1827:2007 specifies methods for the determination of the modulus in shear and the strength of bonds of rubber to metal or other rigid plates, using rubber bonded between four parallel plates. The methods are applicable primarily to test pieces prepared in the laboratory under standard conditions, such as can be used to provide data for the development and control of rubber compounds and…
Éditeur :
ISO
Statut :
Annulée
Date de publication :
2007-07-03
Code(s) de l'ICS :
83.060
Backflow Preventers and Vacuum Breakers
B64.0-07 1 Scope 1.1 The CSA B64 Series of Standards covers vacuum breakers and backflow preventers that are used in potable water supply systems to prevent cross-connections. 1.2 This Standard specifies definitions, general requirements, test methods, markings, and instructions that are common to some or all of the CSA B64 Series. 1.3 This Standard is not a complete Standard in…
Éditeur :
CSA
Statut :
Annulée
Date de publication :
2007-06-30
Code(s) de l'ICS :
23.060; 23.160
Methods of Testing Petroleum and Associated Products - Visual Haze Rating of Distillate Fuel Oils
1. SCOPE 1.1 This method describes two procedures for evaluating the visual haze of distillate fuel oils. 1.1.1 This method also applies to biodiesel fuel blends. 1.2 Procedure A (Field Evaluation) is a rapid field procedure used to rate the visual haze of distillate fuel oils at ambient temperatures. Procedure B (Laboratory Evaluation) is a laboratory procedure used to rate the visual haze of…
Éditeur :
ONGC
Statut :
Annulée
Date de publication :
2007-06-30
Code(s) de l'ICS :
19.100; 75.160.20
Vapour Control Systems In Gasoline Distribution Networks
1. SCOPE 1.1 This standard defines equipment requirements, performance criteria, and operating and testing procedures for the implementation of a vapour control system (VCS) in gasoline distribution networks including terminals, bulk plants, service stations and cargo tanks, commonly known as Stage I. (See Figure 1 for a schematic representation.) 1.1.1 This standard does not include vapour…
Éditeur :
ONGC
Statut :
Annulée
Date de publication :
2007-06-30
Code(s) de l'ICS :
75.200; 75.160.20
Systèmes de récupération des vapeurs dans les réseaux de distribution d'essence
1. OBJET 1.1 La présente norme définit les exigences relatives à l'équipement, les critères de rendement, la procédure à suivre et les méthodes d'essai pour la mise en place des systèmes de récupération des vapeurs (SRV) dans les réseaux de distribution de l'essence comprenant les terminaux, les dépôts routiers, les stations-service et les camions-citernes qui sont regroupés dans…
Éditeur :
ONGC
Statut :
Annulée
Date de publication :
2007-06-30
Code(s) de l'ICS :
75.200; 75.160.20
Rubber, vulcanized — Determination of adhesion to wire cord
ISO 5603:2007 specifies two methods for determining the adhesion strength of vulcanized rubber to wire cord which is embedded in the rubber. The two methods are not the same and do not necessarily give the same results. They are applicable primarily to test pieces prepared in the laboratory under standard conditions and used for the development and control of materials and processes utilized in…
Éditeur :
ISO
Statut :
Annulée
Date de publication :
2007-06-27
Code(s) de l'ICS :
83.060
Recommendations for small renewable energy and hybrid systems for rural electrification - Part 12-1:...
Proposes comparative tests that could be particularly useful for project implementers to test in laboratories of developing countries the capability of products to be used for their project. The tests can be performed locally, as close as possible of the real site operating conditions. Additionally gives some recommendations in order to enhance the performances or effectiveness of the lighting…
Éditeur :
IEC
Statut :
Révisé
Date de publication :
2007-06-20
Code(s) de l'ICS :
27.160; 27.180
Rubber — Determination of adhesion to rigid materials using conical shaped parts
ISO 5600:2007 specifies a method for the determination of the static vulcanized adhesion strength of rubber compounds to rigid materials. The test piece is composed of two conical ends of the rigid material, joined by a cylinder of rubber. The adhesion is obtained by a bonding system which can include not only the rigid material and the rubber compound, but other elements such as thin alloy…
Éditeur :
ISO
Statut :
Annulée
Date de publication :
2007-06-20
Code(s) de l'ICS :
83.060
Road vehicles — Component test methods for electrical disturbances from narrowband radiated electrom...
ISO 11452-8:2007 specifies tests for the electromagnetic immunity of electronic components for passenger cars and commercial vehicles, regardless of the propulsion system (e.g. spark-ignition engine, diesel engine, electric motor), to magnetic fields generated by power transmission lines and generating stations and some powerful electrical equipment, such as motors. To perform this test, the…
Éditeur :
ISO
Statut :
Annulée
Date de publication :
2007-06-18
Code(s) de l'ICS :
33.100.20; 43.040.10
Clinical laboratory testing and in vitro diagnostic test systems — Susceptibility testing of infecti...
ISO 20776-2:2007 establishes acceptable performance criteria for antimicrobial susceptibility test (AST) devices that are used to determine minimum inhibitory concentrations (MIC) and/or interpretive category determinations of susceptible, intermediate and resistant (SIR) strains of bacteria to antimicrobial agents in medical laboratories. ISO 20776-2:2007 specifies requirements for AST devices (…
Éditeur :
ISO
Statut :
Annulée
Date de publication :
2007-06-13
Code(s) de l'ICS :
11.100.20