Acoustics — Rating of sound insulation in buildings and of building elements — Part 1: Airborne soun...
ISO 717-1:2013: a) defines single-number quantities for airborne sound insulation in buildings and of building elements such as walls, floors, doors, and windows; b) takes into consideration the different sound level spectra of various noise sources such as noise sources inside a building and traffic outside a building; c) gives rules for determining these quantities from the results of…
Evaluation of thickness, density and interface width of thin films by X-ray reflectometry — Instrume...
ISO 16413:2013 specifies a method for the evaluation of thickness, density and interface width of single layer and multilayered thin films which have thicknesses between approximately 1 nm and 1 μm, on flat substrates, by means of X-Ray Reflectometry (XRR).
This method uses a monochromatic, collimated beam, scanning either an angle or a scattering vector. Similar considerations apply to the case…
Imaging materials — Photographic film and papers — Method for determining the resistance of photogra...
ISO 18914:2013 specifies a laboratory test method for determining the resistance of photographic emulsions or gelatin backings to abrasion damage during processing.
This method may be used to determine the effects of variations in processing solutions, gelatin layer properties, processing solution temperatures and times, or a combination of these factors, on the wet scratch resistance of gelatin…
Flour from wheat (Triticum aestivum L.) — Amperometric method for starch damage measurement
ISO 17715:2013 specifies the determination of the damage to starch using an amperometric method.
It is applicable to all flour samples from industrial or laboratory milling of wheat (Triticum aestivum L.).
Household and similar electrical appliances - Test code for the determination of airborne acoustical...
IEC 60704-2-14:2013 specifies the measuring conditions to provide for sufficient accuracy in determining the noise emitted and comparing the results of measurements taken by different laboratories, whilst simulating as far as possible the practical use of household refrigerators, frozen-food storage cabinets and food freezers. It is recommended to consider the determination of noise levels as…
Household and similar electrical appliances - Test code for the determination of airborne acoustical...
IEC 60704-2-14:2013 specifies the measuring conditions to provide for sufficient accuracy in determining the noise emitted and comparing the results of measurements taken by different laboratories, whilst simulating as far as possible the practical use of household refrigerators, frozen-food storage cabinets and food freezers. It is recommended to consider the determination of noise levels as…
Rubber, vulcanized or thermoplastic — Determination of tension set under constant elongation, and of...
ISO 2285:2013 specifies a number of methods of determining the dimensional changes in test pieces of vulcanized or thermoplastic rubber during and after tensile loading for relatively short periods under constant elongation or constant loading.
The constant-elongation test is intended to measure the ability of rubbers to retain their elastic properties after extension, at a standard laboratory…
Safe use of electrosurgical medical devices and systems in health care
Scope
1.1
This Standard applies to the use of medical devices and systems for the application of electrosurgical energy. It applies to all procedures in all health care settings where such medical devices and systems are used, including, but not limited to, the following:
a) surgical facilities;
b) dental clinics;
c) medical offices;
d) veterinary facilities;
e) laboratories and other…
Clinical laboratory testing and in vitro diagnostic test systems — Reference method for testing the ...
ISO 16256:2012 describes a method for testing the susceptibility to antifungal agents of yeasts, including Candida spp. and Cryptococcus neoformans, that cause infections. The reference method described here has not been used in studies of the yeast forms of dimorphic fungi, such as B. dermatitidis and/or H. capsulatum variety capsulatum.
ISO 16256:2012 describes the broth microdilution…
