Standard Test Method for Determination of Long-Term Thermal Resistance of Closed-Cell Thermal Insula...
Scope
1.1 This procedure defines the long-term thermal resistance (LTTR) of a foam product as the value
measured after 5-year storage in a laboratory environment and provides means for its prediction based on
an accelerated laboratory test.
1.2 This procedure, based on ASTM standard test methods ASTM C1303 and ASTM C518, can be
applied to a wide range of preformed as well as field…
Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 3: Accelerated ageing methods...
This document specifies a test method for investigating the oxidative stability of ultra-high-molecular-weight polyethylene (UHMWPE) moulded forms as a function of processing and sterilization method. This document describes a laboratory method for accelerated ageing of specimens taken from UHMWPE moulded forms or forms fabricated from these for use in the manufacture of surgical implants. The…
Flexible and rigid cellular polymeric materials — Accelerated ageing tests
This document specifies laboratory procedures which are intended to imitate the effects of naturally occurring reactions such as oxidation or hydrolysis by humidity for flexible and rigid cellular polymeric materials.
Geotechnical investigation and testing — Laboratory testing of rock — Part 1: Determination of water...
This document specifies a method of determining the water content of rocks.
This document is applicable to the laboratory determination of the water content of a rock test specimen by oven-drying within the scope of geotechnical investigations. The oven-drying method is the definitive procedure used in usual laboratory practice.
The practical procedure for determining the water content of a rock…
Paints and varnishes — Determination of resistance to humidity — Part 2: Condensation (in-cabinet ex...
This document specifies the general conditions and procedures observed when testing coated test specimens by exposing them to constant condensation-water atmospheres or alternating condensation-water atmospheres, in a cabinet with a heated water reservoir. These conditions and procedures ensure that the results of tests carried out in different laboratories are reproducible.
This document does…
Solid biofuels — Characterization of wood chip fuels — Essential information for producers, supplier...
This document provides guidance on the characterization of wood chips produced from raw materials, as defined in ISO 17225-4, for the following aspects:
— quality classes and specifications;
— sampling, sample preparation and test methods for physical characteristics which can be conducted on site;
— practical information about testing to be carried out by external laboratories.
This…
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Part...
IEC 61326-2-6:2025 applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of IN VITRO DIAGNOSTIC MEDICAL ELECTRICAL EQUIPMENT (IVD MEE). This part of IEC 61326 applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of IVD MEE in the presence of electromagnetic disturbances and to electromagnetic disturbances emitted by IVD MEE.
BASIC SAFETY with regard to electromagnetic disturbances is applicable…
Corrosion of metals and alloys — Corrosion in artificial atmosphere — Accelerated corrosion test inv...
This document specifies an atmospheric accelerated test procedure in two closely related variants that contain intermittent salt exposure combined with dynamic humidity patterns: variant A at constant dew point and variant B at constant temperature. These variants are used in assessing the corrosion resistance of metals in environments where there is a significant influence of chloride ions,…
Paints and varnishes — Determination of pH value — Part 1: pH sensors with glass membrane
This document specifies a method for laboratory measurement of the pH value of polymer dispersions and coating materials using pH sensors with a glass membrane.
Molecular biomarkers — Detection of DNA in cotton used for textile production — Part 1: Extraction o...
This document specifies requirements and recommendations to laboratories that perform extraction of polymerase chain reaction (PCR) quality deoxyribonucleic acid (DNA) from cottonseed, cotton leaf and raw material derived therefrom, that is sufficient for the purpose of PCR analysis.
This document is applicable to:
a) identifying cotton raw material from which PCR quality DNA can be…
