Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperatur...
IEC 60695-2-13:2010 specifies the details of the glow-wire test to be applied to test specimens of solid electrical insulating materials or other solid materials for ignitability testing to determine the glow-wire ignition temperature (GWIT). The GWIT is the temperature which is 25 K (or 30 K) higher than the maximum test temperature, determined during this standardized procedure, at which the…
ISO 14171:2010 specifies requirements for the classification of electrode/flux combinations and weld metal in the as-welded condition and in the post-weld heat-treated condition for submerged arc welding of non alloy and fine grain steels with a minimum yield strength of up to 500 MPa or a minimum tensile strength of up to 570 MPa. One flux can be classified with different solid wire electrodes…
Welding consumables — Solid wire electrodes, solid wires and rods for fusion welding of titanium and...
ISO 24034:2010 specifies requirements for the classification of solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium alloys. The classification is based on their chemical composition.
The compositions of solid wire electrodes for metal inert gas (MIG) welding are the same as solid wire electrodes, solid wires and rods for tungsten inert gas (TIG) arc welding,…
Ergonomics — Accessible design — Auditory signals for consumer products
ISO 24500:2010 specifies the auditory signals used as a means of feedback for operations or conditions of consumer products when used by a person with or without visual or auditory impairment. It is intended to be applied as appropriate to such products depending on the product type and its conditions of use.
It is applicable to auditory signals of a fixed frequency used in general applications…
ISO 10582:2010 specifies the characteristics of non-cushioned, heterogeneous floor coverings, based on poly(vinyl chloride) (PVC), supplied in either tile or roll form. Products may contain a transparent, non-PVC factory finish.
To encourage the consumer to make an informed choice, ISO 10582:2010 includes a classification system (see ISO 10874) based on the intensity of use, which shows where…
Méthode d'essai normalisée pour évaluer le potentiel incendiaire des cigarettes
L'ISO 12863:2010 fournit une évaluation normalisée de la capacité d'une cigarette, positionnée sur un des trois substrats normalisés, à s'éteindre ou à générer suffisamment de chaleur pour continuer à se consumer et, par conséquent, à potentiellement mettre le feu à la literie ou aux meubles rembourrés. L'ISO 12863:2010 s'applique aux cigarettes manufacturées se consumant…
ISO 10595:2010 specifies the characteristics of semi-flexible/vinyl composition floor tiles based on poly(vinyl chloride) (PVC) binder and supplied in tile form. Products may contain a transparent, non-PVC factory finish.
To encourage the consumer to make an informed choice, ISO 10595:2010 includes a classification system (see ISO 10874) based on the intensity of use, which shows where these…
Energy performance of food service refrigerators and freezers
Preface
This is the second edition of CSA C827, Energy performance of food service refrigerators and freezers. It supersedes the first edition, published in 1998.
Scope
1.1
This Standard applies to commercial refrigerator, refrigerator-freezer, and freezer cabinets that are intended for storing or holding food products and other perishable merchandise.
1.2
This Standard specifies…
Welding consumables — Covered electrodes for manual metal arc welding of creep-resisting steels — Cl...
ISO 3580:2010 specifies requirements for classification of covered electrodes, based on the all-weld metal in the heat-treated condition, for manual metal arc welding of ferritic and martensitic creep-resisting and low alloy elevated temperature steels.
ISO 3580:2010 is a combined specification for classification utilizing a system based upon the chemical composition of the all-weld metal, with…
