Information technology - Wireless Beacon-enabled Energy Efficient Mesh network (WiBEEM) for wirele...
ISO/IEC 29145-1:2014(E) specifies the physical (PHY) layer of WiBEEM (Wireless beacon-enabled energy efficient mesh network) protocol for wireless home network services that supports a low power-consuming wireless mesh network topology as well as device mobility and QoS.
Information technology - Wireless beacon-enabled energy efficient mesh network (WiBEEM) for wireless...
ISO/IEC 29145-1:2014(E) specifies the physical (PHY) layer of WiBEEM (Wireless beacon-enabled energy efficient mesh network) protocol for wireless home network services that supports a low power-consuming wireless mesh network topology as well as device mobility and QoS.
Information technology - Wireless beacon-enabled energy efficient mesh network (WiBEEM) for wireless...
ISO/IEC 29145-2:2014(E) specifies the MAC of the WiBEEM (Wireless beacon-enabled energy efficient mesh network) protocol for wireless home network services that supports a low power-consuming wireless mesh network as well as device mobility and QoS.
Information technology - Wireless beacon-enabled energy efficient mesh network (WiBEEM) for wireless...
ISO/IEC 29145-3:2014(E) specifies the network layer (NWK) of the WiBEEM (Wireless Beacon-enabled Energy Efficient Mesh network) protocol for wireless home network services that supports a low power-consuming wireless mesh network as well as device mobility and QoS.
Scope
1.1
This Standard applies to newly produced vented gas fireplace heaters (see Clause 3, Definitions), hereinafter referred to as appliance(s), constructed entirely of new, unused parts and materials, and having input ratings up to and including 400,000 Btu/hr (117 228 W);
a) for use with natural gas;
b) for use with liquefied petroleum (propane);
c) direct vent appliances for…
Information technology — Automatic identification and data capture techniques — Air interface
specif...
Scope
This International Standard applies to Mobile radio frequency identification (RFID) interrogator devices used to
inventory passive or semi-passive backscatter tags at 860 MHz to 960 MHz in a mobile (non-fixed) application
independent from specific communication details, i.e. modulation technique and command set.
Furthermore, the scope of this International Standard is mobile consumer…
Information technology — Radio frequency identification for item management — Implementation guideli...
Scope
This Technical Report provides guidance to systems designers to help them determine potential threats to
data security of the tag and tag-to-reader communication in an RFID system, and appropriate
countermeasures to provide data security (identified as 1 through 2 in Figure 1). Although important, it is
beyond the scope of this Technical Report to address security aspects of the reader-to-…
Low-voltage switchgear and controlgear assemblies - Part 7: Assemblies for specific applications suc...
IEC TS 61439-7:2014-02(en-fr) defines the specific requirements of ASSEMBLIES as follows:
- ASSEMBLIES for which the rated voltage does not exceed 1 000 V in case of a.c. or 1 500 V in case of d.c;
- stationary or movable ASSEMBLIES with enclosure;
- ASSEMBLIES intended for use in connection with the generation, transmission, distribution and conversion of electric energy, and for the control…
Guidelines for the measurement method of nonlinearity for surface acoustic wave (SAW) and bulk acous...
IEC 62761:2014-02(en-fr) gives the measurement method for nonlinear signals generated in the radio frequency (RF) surface acoustic wave (SAW) and bulk acoustic wave (BAW) devices such as filters and duplexers, which are used in telecommunications, measuring equipment, radar systems and consumer products. It includes basic properties of non-linearity, and guidelines to setup the measurement system…
