Rechercher

This Guide is a joint publication of The Ministry of the Environment, CSA International, Enbridge Consumers Gas, and Union Gas. 1. Scope 1.1 General This Guide provides assistance to municipal facilities for the development and implementation of an environmental system (EMS) based on ISO 14001. The scope of this Guide is limited to buildings or facilities used for commercial or…

This National Standard of Canada is based on International Standard IEC 335-2-16:1994 (fourth edition, 1994-12). 1 Scope This clause of part 1 is replaced by: This standard deals with the safety of electric food waste disposers for household and similar purposes, their rated voltage being not more than 250 V. Appliances not intended for normal household use but which nevertheless may be a…

1.1 Scope 1.1.1 This standard applies to newly produced vented gas fireplace heaters (See Part IV, Definitions),hereinafter referred to as appliances, constructed entirely of new, unused parts and materials: a. For use with natural gas; b. For use with liquified petroleum (propane); c. direct vent appliances for manufactured home (USA only) or mobile home OEM installation…

Specifies the content, format and recording method for the data blocks forming the helical records on tape containing audio, video and system data. Describes the specifications for the recording of single DTV programmes. The contents of the corrigendum of June 2001 have been included in this copy.

1.1 Scope 1.1.1 This standard applies to newly produced combination gas controls (see Definitions, Part IV), hereinafter referred to as controls, constructed entirely of new, unused parts and materials. 1.1.2 The combination control may include other functions such as pilot gas filters, pressure switches, etc., which shall be of an approved type (see Definitions, Part IV), or shall…

This part of ISO 15792 specifies the preparation of test piece and specimens. The purpose is to determine mechanical properties of all-weld metal where required by the consumable classification standard or for other purposes, in arc welding of steel, nickel and nickel alloys. This part of ISO 15792 is not applicable to single- or two-pass welding or fillet welding. For these cases, ISO 15792-2…

This part of ISO 15792 specifies the preparation of butt weld test pieces and specimens. The purpose is to define test methods in order to determine strength and impact strength of the welded joint when testing welding consumables with single-run and two-run technique, not suitable for electro-slag or electro-gas welding. This part of ISO 15792 is applicable to welding consumables for arc welding…

HES standards address both interoperability requirements, interconnectivity requirements and plug-compatibility requirements. Devices are described as interoperable if the functionality of the higher communication layers is such that commands can be exchanged and result in meaningful action. For interconnectivity it is sufficient to specify mechanical, electrical, and functional (lower layer…