Rechercher

This document defines hydraulic power beyond. It specifies the number, type, capacity, and identification of the connections between agricultural and forestry tractors and implements.

The present document refers to the panel-to-structure and panel-to panel connections used for the cladding systems of reinforced concrete frame structures of single-storey buildings, typically precast. They can be used also for multi-storey buildings with proper modifications. The fastening devices considered in the present document consist mainly of steel elements or sliding connectors.…

1 Scope and object This clause of Part 1 is applicable except as follows: 1.1.1 Equipment included in scope Replace the existing text with the following: This part of IEC 61010 specifies safety requirements for HAND-HELD and hand-manipulated current sensors described below. These current sensors are for measuring, detecting or injecting current, or indicating current waveforms on circuits…

1 Scope 1.1 This Standard specifies the minimum certification requirements for facilities engaged in the manufacture of metal-plate-connected wood trusses designed in accordance with CSA O86 and TPIC in order to conform with industry standards. 1.2 In this Standard, “shall” is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the…

IEC TS 62910:2020 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy way to compare all the changes between the official IEC Standard and its previous edition. IEC TS 62910:2020 provides a test procedure for evaluating the performance of Under Voltage Ride-Through (UVRT)…

IEC TS 62910:2020 provides a test procedure for evaluating the performance of Under Voltage Ride-Through (UVRT) functions in inverters used in utility-interconnected Photovoltaic (PV) systems. This document is most applicable to large systems where PV inverters are connected to utility high voltage (HV) distribution systems. However, the applicable procedures may also be used for low voltage (LV…

IEC 60352-5:2020 is applicable to solderless press-in connections for use in electrical and electronic equipment and components.<br /> The press-in connection consists of a termination having a suitable press-in zone which is inserted into a hole of a board.<br /> Information on materials and data from industrial experience is included in addition to the test procedures to provide…

IEC 63103:2020(E) specifies methods of measurement of electrical power consumption in non-active mode(s), as applicable for electrical lighting equipment. This includes electrical lighting equipment incorporating non-illumination components. This document specifies neither performance requirements nor limits on power consumption. This document applies to lighting equipment connected to a supply…

IEC 61439-2:2020(E) defines the specific requirements for the power switchgear and controlgear assembly (abbreviated ‘PSC-assembly’ throughout this document see 3.1.101) as follows: <ul> <li>assemblies for which the rated voltage does not exceed 1 000 V AC or 1 500 V DC;</li> <li>assemblies designed for a nominal frequency of the incoming supply or supplies not exceeding…

IEC 63103:2020 specifies methods of measurement of electrical power consumption in non-active mode(s), as applicable for electrical lighting equipment. This includes electrical lighting equipment incorporating non-illumination components. This document specifies neither performance requirements nor limits on power consumption. This document applies to lighting equipment connected to a supply…