Rechercher

1 Scope 1.1 The requirements of this Standard apply to Grades A and B acrylic-polymer-coated, siliconepolymer- coated, or vinyl-polymer-coated electrical sleeving that consists of closely woven fabric made from glass (see Table 1 for materials and ratings) and intended for use in equipment designed to be installed and used in accordance with the rules of CSA C22.1, Canadian Electrical Code,…

This document establishes a system for sealing the port connection of couplings used in the aerospace industry. It specifies dimensions to achieve interchangeability of the port connection, the fitting end and a seal. The seal can be a standard O‑ring or a special ring.

This document defines the geometry of the interface of removable 24° cone couplings for fluid systems in aircraft. The connection with the pipe of each one of the connecting elements can be of different design. This document specifies the dimensions which allow the interchangeability of the male and female elements and of the nut used for the connection. The dimensions define the maximum volume…

Field devices are a key component in intelligent transport systems (ITS). Field devices include traffic signals, message signs, weather stations, traffic sensors, roadside equipment for connected ITS (C-ITS) environments, etc. Field devices often need to exchange information with other external entities (managers). Field devices can be quite complex necessitating the standardization of many data…

This document specifies the requirements for a protocol derived from HCI/HCP (see ETSI TS 102 622) enabling communication for devices regardless of data link and physical layers. This document covers the following: a) outline of a system comprised of one or more hosts and one controller; b) extension of connection topology between hosts and host controller (i.e. star topology and additional…

This document specifies the requirements for a protocol derived from HCI/HCP (see ETSI TS 102 622) enabling communication for devices regardless of data link and physical layers. This document covers the following: a)   outline of a system comprised of one or more hosts and one controller; b)   extension of connection topology between hosts and host controller (i.e. star topology and additional…

This document specifies the conformance test plan (CTP) for the lean application layer for MOST, a synchronous time-division-multiplexing network, as specified in ISO 21806-14. This document specifies conformance test cases (CTCs) for root nodes and remote nodes in the following categories: —    network startup; —    network shutdown; —    network events; —    node discovery; —    connection…

This document specifies the technical requirements for the lean application layer for MOST, a synchronous time-division-multiplexing network. The lean application layer includes a specification of the services available to control the configuration and behaviour of the network management. The lean application layer covers the definition of: —    node kinds, —    node addressing, —    data…

This document specifies definitions, dimensions and tolerances of parallel screw threads of M30 x 2, M25 x 2 and M18 x 1,5, for the connection of valves to medical and industrial gas cylinders. This document does not contain the connection requirements for: —    mechanical strength; —    gas tightness; —    capability of repeated assembly and dismounting operations (this aspect is covered in ISO…

This document specifies particular requirements for safety, construction and materials of household gas surface cooking appliances. For general requirements for safety, construction and materials of gas hobs, see ISO/TS 21364-1:2021. This document covers the following: —    surface cooking appliances: —    hobs; —    surface grills; —    griddles; being built-in, part of a cooking appliance or…