1. Scope
1.1 This Standard applies to unit equipment intended for connection to circuits with nominal voltages of 600 V and less, and intended for installation indoors in nonhazardous locations in accordance with the Canadian Electrical Code, Part I.
1.2 This Standard applies to unit equipment intended to provide illu mination in the event of a failure of the normal power supply…
Wiring Space and Wire Bending Space in Enclosures for Equipment Rated 750 V or Less
1. Scope
1.1
This Standard applies to enclosed equipment that is to be permanently field
connected to line or load circuits rated 750 V or less.
1.2
Minimum wiring space and wire bending space requirements are specified for
field installed wires terminating in or passing through enclosures or terminal
boxes.
1.3
The requirements are considered to be the minima that would permit…
General Requirements for Double-Insulated Equipment
1. Scope
1.1 This Standard is intended to provide basic requirements for the evaluation of double-insulated cord-connected electrical equipment.
1.2 This Standard applies to equipment for use on circuits not exc eeding 250 V-to-ground and designed to be used in accordance with the Rules of the Canadian Electrical Code, Part I.
1.3 This Standard supplements individual standards…
Commercial and Residential Central Air Conditioners
1. Scope
1.1
This Standard applies to stationary air conditioning equipment for indoor and
outdoor use, for central air cooling, rated at 7200 V or less, single or
polyphase, designed to be used in nonhazardous locations in accordance with the
Rules of the Canadian Electrical Code, Part I. The equipment may be for direct
cooling or air or for indirect cooling through another medium, such…
1. Scope
1.1 This Standard applies to appliance plugs used as components of heater cord sets for use on cord-connected heating appliances rated for use on nominal single-phase system voltages of 240 V and less, designed to be used in dry nonhazardous locations in household and similar applications in accordance with the Rules of the Canadian Electrical Code, Part I.
1. Scope
1.1 This Standard applies to cord-connected electric heater systems intended for use with the mattresses of household water beds and designed for use in accordance with the Rules of the Canadian Electrical Code, Part I, on supply circuits having a nominal voltage of 120 V.
1.2 This Standard does not apply to electric heaters intended for immersion in water in normal use.
Industrial-process control valves. Part 6: Mounting details for attachment of positioners to control...
Permits a variety of positioning devices which respond to a linear motion to be mounted on the actuator of a control valve, either directly or by employing an intermediate mounting bracket.
The standardized mounting applies to positioners which are mounted on the side of the actuator, to those actuators which have a travel of 100 mm or less, and is designed to cover three basic types of actuator…
Safety requirements for mains operated electronic and related apparatus for household and similar ge...
Applies to receiving apparatus for sound or vision, amplifiers, load and source transducers, motor-driven apparatus (radio-gramophones, tape recorders and sound-film projectors, etc.) which are to be connected to the mains, directly or indirectly, and which are intended for domestic and similar indoor use.
Gives a safety and classification terminology based on IEC 536. Specifies requirements for…
