Rechercher

Specifies types and main dimensions of the couplings intended for a bow-to-stern connection of vessels in push tows, navigating in waters with a wave height of not more than 2 m. Lays down also basic technical requirements for the couplings. Does not cover side couplings.

La présente Norme internationale spécifie les conditions d'interchangeabilité et les caractéristiques de fonctionnement, et fixe également les spécifications techniques pour les essais, des liaisons hydrauliques de freinage assisté des matériels agricoles et forestiers remorqués. La présente Norme internationale est applicable exclusivement aux liaisons hydrauliques de freinage. L'…

1. Scope 1.1 These requirements apply to signal equipment for supply voltages up to 600 V ac, both permanently and cord connected, intended for household and industrial use in non-hazardous locations, in accordance with the Rules of the Canadian Electrical Code, Part I. 1.2 The requirements are not intended to replace other requirements that are mandated by provincial or federal…

1. Scope 1.1 This Standard applies to portable and stationary, incandescent and gaseous discharge stage and studio luminaires of types suitable for use in dry, damp, or wet locations, intended for use in nonhazardous locations and for connection to a supply circuit of 600 V and less between conductors, designed to be installed and used in accordance with the Rules of the Canadian Electrical…

Specifies and identifies in a table of comparison the possible types of connection of thermoplastic valves to various pipe systems, these are butt fusion, solvent cemented or socket fusion, screwed, flanged and elastomeric sealing rings.

Serves as a guide in the co-ordination of system design, to minimize the variety of programs required, to promote uniformity of programming techniques, and to foster interchangeability of programs between NC drawings and flame cutting machines used in the shipbuilding industry. The "ESSI format" may be used in connection with any data code for punched cards, punched tapes, magnetic…

Specifies a system of devices, the use of which ensures that anaesthetic vaporizers can be filled only with the intended liquid anaesthetic agent. The specifications consist of essential requirements for the configurations and dimensions of the system's components. Keyed filling devices including vaporizer receptacles, liquid anaesthetic agent containers, and inter- connecting adaptors…

1. Scope 1.1 This Standard applies to encapsulated isolating transformers for use as a circuit continuity device intended to be installed in airport field lighting series circuits for use in nonhazardous locations, in accordance with the Canadian Electrical Code, Part I. 1.2 The transformer consists of primary and secondary coils that are wound upon a core, the assembly being enclosed in…