Low-voltage fuses. Part 2: Supplementary requirements for fuses for use by authorized persons (fuses...
Section I: Fuses with fuse-links with blade contacts.
Section II: Fuses with fuse-links for bolted connections.
Section III: Fuses with fuse-links having cylindrical contact caps.
Specifies dimensional requirements necessary for the mounting of injection nozzle holders in diesel engines. The location of the fuel inlet and leak-off connections are not defined since they vary according to the particular application. Nozzle holders types 12 and 13 are used with the nozzles specified in ISO 2697. Some figures illustrate shapes and reference quantities of concern. This second…
1. Scope
1.1 This Standard applies to solid-state, single-phase motor speed controls, rated at 300 V and less, 20 A and less, designed to be used in circuits for the control of shaded pole, permanent split capacitor, or universal motors, and other motors suitable for use with this type of control, intended for use in nonhazardous locations in accordance with the Canadian Electrical Code,…
Standard for Compounds and Tapes for Threaded Pipe Joints
1. SCOPe
1.1 This Standard is for the determination of the acceptability of pipe joint
compounds and tapes for piping systems intended for the containment of alcohol,
gasohol, natural gas and methane, oxygen, petroleum distillates, propane and
butane, steam, and water (potable and non-potable).
1.2 Unless otherwise specified, products meeting this Standard are considered
suitable for the…
Functional and Compatibility Requirements for Digital PBX's, and Analogue
PBX's with Dig...
Provides additional functional and compatibility criteria for any
type of PBX with DS-1 digital interfaces. This Standard also
provides functional and compatibility criteria for digital PBX's
with only analogue interfaces. It also provides requirements for
connections made through a digital switching matrix or involving
a DS-1 digital interface that differ from those in CSA Standard…
Piping - PVC Plastic Rigid Pipe and Fittings, 150 mm in Diameter or Smaller
for Underground Sewage...
1. OBJECT AND SCOPE
The object of this standard is to establish requirements for dimensions,
characteristics and test methods relating to rigid* pipe and fittings,
manufactured from PVC compounds, used in underground applications for conveying
liquids under no pressure.
It covers rigid, non-perforated, smooth interior wall (see note 1), pipes and
fittings with a nominal diameter equal…
