Rechercher

1. Scope 1.1 This Standard applies to locking type plugs, receptacles, equipment power inlets and outlets, and connectors rated up to 60 A and up to 600 V ac or 250 V dc, for use in accordance with the Canadian Electrical Code, Part I. 1.2 The devices covered by this Standard are intended for use with copper conductors only in making readily detachable electrical connections utilizing a…

Applies to the interconnection and systems requirements for the control of automatic slide projectors with built-in triacs and low-voltage projector lamps supplied via insulating transformers. Ensures, for correct system function, that in particular the connection of projectors to dissolve control units meets agreed interconnection standards.

Specifies dimensional requirements necessary for the mounting of injection nozzle holders in diesel engines. The location of the fuel inlet and leak-off connections are not defined since they vary according to the particular application. A figure illustrates the shape and reference quantities of concern. Preferred shank lengths are given in table 2.

Applies to Factory-Built Chimney Connectors which do not require field fabrication. They are for use with gas, liquid and solid fuel-fired residential appliances and building heating equipment where the flue-gas temperatures do not normally exceed 650 degrees C. They are intended for use inside buildings to form a connection to a factory-built chimney suitable for use with solid fuel, or…

Contains requirements for quick-connect couplings and adapters of the external lug design for use with forestry fire hose of the 38 mm standard size.

Applies to asbestos-cement, nonpressure, small-diameter pipe, suitable for use as building sewer pipe and as building drain pipe buried under-floor.

This part specifies the essential dimensions of socket-type connections, used for spark-ignition engines. Applies to high-tension sockets and cable connectors of type "A" (figures 1 and 2). An annex gives socket and connector type "B" (figures 3 and 4). This first edition cancels and replaces the ISO 3553:1975.

Specifies a standard series of diameter sizes for the front part of a lens barrel and a standard series of thread sizes for the same front barrel. The data are applicable to lenses of cameras, enlargers and similar equipment. They are meant to simplify the production and storage of such auxiliaries as screw-in filters.

Specified are details of the screw connectins to be used between a camera and a tripod or other accessory. The form of the connection is shown, and details are given of the nut and bolt screw threads.