Rechercher

Applies, when required by the relevant product standard, to switchgear and controlgear hereinafter referred to as 'equipment' and intended to be connected to circuits, the rated voltage of which does not exceed 1 000 V a.c. or 1 500 V d.c. It states those general rules and requirements which are common to low-voltage equipment as defined in Subclause 1.1, including for example:…

1. Scope 1.1 This Standard covers assemblies of wiring terminals and supporting blocks for copper conductors, copper and aluminum conductors, and aluminum conductors rated at a maximum of 1500 V and 2000 kcmil, intended to provide for the connection of wiring designed to be used in accordance with the Rules of the Canadian Electrical Code, Part I. 1.2 These terminal blocks are…

1. Scope 1.1 This Standard applies to locking type plugs, receptacles, equipment power inlets and outlets, and connectors rated up to 60 A and up to 600 V ac or 250 V dc, for use in accordance with the Canadian Electrical Code, Part I. 1.2 The devices covered by this Standard are intended for use with copper conductors only in making readily detachable electrical connections utilizing a…

Applies to the interconnection and systems requirements for the control of automatic slide projectors with built-in triacs and low-voltage projector lamps supplied via insulating transformers. Ensures, for correct system function, that in particular the connection of projectors to dissolve control units meets agreed interconnection standards.

Specifies dimensional requirements necessary for the mounting of injection nozzle holders in diesel engines. The location of the fuel inlet and leak-off connections are not defined since they vary according to the particular application. A figure illustrates the shape and reference quantities of concern. Preferred shank lengths are given in table 2.

Applies to Factory-Built Chimney Connectors which do not require field fabrication. They are for use with gas, liquid and solid fuel-fired residential appliances and building heating equipment where the flue-gas temperatures do not normally exceed 650 degrees C. They are intended for use inside buildings to form a connection to a factory-built chimney suitable for use with solid fuel, or…

Contains requirements for quick-connect couplings and adapters of the external lug design for use with forestry fire hose of the 38 mm standard size.

Applies to asbestos-cement, nonpressure, small-diameter pipe, suitable for use as building sewer pipe and as building drain pipe buried under-floor.