Rechercher

Applies to both cord-connected and permanently connected storage-tank water heaters, having tanks less than 610 mm inside diameter, for use on nominal system voltages of 600 V and less, and designed to be used in nonhazardous household and commercial locations in accordance with the Rules of the Canadian Electrical Code, Part I.

1.1 Applies to apparatus whose purpose is to transmit and receive and process radio signals and signals of voice, musical or visual origin and that operates from a supply circuit not exceeding 120 V in accordance with the Rules of the Canadian Electrical Code, Part I and which is not necessarily under the jurisdiction of a skilled person. Processing of electronic signals includes…

Establishes practical criteria for determining valve outlet connections for gas cylinders of a capacity not greater than 150 l. Applies particullary to countries having neither standards nor regulations and to new gases developed for industrial use. I does not apply to connections used for cryogenic gas groups; annex B deals with connections; double-faucet non-interchangeable connections are…

Deals with the electrical and mechanical interfaces to allow microprocessor system components to interact with each other. Applies to an interface used to connect microprocessor system components by means of a pin and socket (indirect) connector type backplane. Ensures that bus backplanes, card racks and printed circuit boards are mechanically compatible. Note: -For the price of this publication…

Specifies procedures for flexible hose and hose assemblies used in fluid systems in the pressure and temperature ranges covered by pressure classes B, D and E, and temperature types I, II and III as specified in ISO 6771. Applies to the hose and the hose coupling. The tests and assembly requirements for the connecting and fittings are covered in the procurement specification. Is applicable when…

1. Scope 1.1 This Standard applies to microwave ovens capable of generating less than 25 kW of microwave power and manufactured for use in homes, restaurants, food vending or service establishments, and in similar locations, in accordance with the Rules of the Canadian Electrical Code Part I. 1.2 This Standard applies to microwave ovens intended to operate through the application of…

1. Scope 1.1 This Standard applies to cords and cord sets intended for indoor use to electrically connect communication systems that have a normal operating voltage to ground of less than 150 V rms, and that are installed or used in accordance with the Rules of the Canadian Electrical Code, Part I. 1.2 This Standard applies to single, paired, and multiconductor cords, as well as cord…

1. Scope 1.1 This Standard applies to single-phase electric tools of the bench type intended for use in nonhazardous locations in accordance with the Canadian Electrical Code, Part I, when connected to a nominal system voltage of 240 V or less. 1.2 Requirements for cord-connected, double-insulated bench tools are specified in Clause 7 of this Standard. 1.3 This Standard does not…

Specifies the way in which coaxial connectors described in IEC 60169-2 can be used for the connection of radio and television receivers to aerial feeders. Has the status of a technical report.

Applies to flat quick-connect terminations consisting of male tabs with hole or dimple detents and the mating female connectors. Establishes uniform requirements for the dimensions, performance characteristics and test programme.