1.1 General
Except as provided for in Clause 1.1.2, this Standard applies to the design,
construction, installation, operation, and inspection of every refrigerating
system, as provided for by the Act and defined in this Code.
1.1.2
This Standard does not apply to the use of water or air as a refrigerant, nor
to bulk-storage gas tanks that are not permanently connected to a…
Aerospace — Fluid systems — Interface of 24 degree cone metric couplings
Defines the geometry of the interface of couplings for fluid systems in aircrafts. Specifies the dimensions which allow the interchangeability of the male and female elements and of the nut used for the connection. The dimensions define the maximum volume of the male fitting.
Shipbuilding and marine structures — Filling connection for drinking water tanks — Part 1: General r...
Specifies the general requirements, the composition and the designation of the complete drinking water filling connection aboard ships for attachment of piping from another ship or from a land distribution system and gives a recommendation for the installation aboard ships.
Shipbuilding and marine structures — Filling connection for drinking water tanks — Part 2: Component...
Specifies the technical details of the components of the drinking water filling connection aboard ships for attachment of piping from another ship or from a land distribution system and lays down the designation of the main components such as flanges, securing bolts and gasket.
Passenger car radio connections — Part 1: Dimensions and general requirements
Applies to the multi-pole connector and the positions of antenna sockets. Specifies the contact allocation of the connector. The connector is both for permanent connection of the car radio to the vehicle harness and for extractable car radios.
Terms and definitions used in connection with reference materials
This Guide recommends terms and their meaning used in connection with reference materials, taking into account those terms which are used in reference material certificates and appropriate test reports.
Road vehicles — Dry ignition coils using rotating high-voltage distributor
Specifies the dimensions, shape and connections for coils with two fixing holes, four fixing and/or positioning holes, and with mounting brackets. Applies to ignition systems for spark-ignited internal combustion engines of road vehicles.
Motor-Operated Appliances (Household and Commercial)
1. Scope
1.1 This Standard applies to motor-operated appliances
intended for use on nominal system voltages of 600 V and less, except that where appliances are driven by universal-type motors or electromagnetic mechanisms the scope is limited to appliances rated for use on nominal system voltages of 240 V or less. It applies to appliances designed to be used in accordance with the Rules…
IEC system of plugs and socket-outlets for household and similar purposes - Part 2: Plugs and socket...
Applies to the IEC system of plugs and socket-outlets rated 15 A 125 V a.c. for household and similar purposes for the connection of equipment to distribution systems having nominal voltages between 100 V and 125 V a.c., in so far as dimensional requirements are concerned.
