Photography — Electronic flash equipment — Connectors to synchro-cord
Specifies type and dimensions of the electrical connectors (plug and socket) to be used for electronic photoflash equipment. Gives a limited number of types of connector and the dimensions to be used for the connection between flash unit and flash synchro-cords.
Sécurité des matériels de traitement de l'information, y compris les matériels
de bureau élect...
1.1.1
La présente norme est applicable aux matériels de traitement de l'information,
y compris les matériels de bureau électriques et les matériels associés, de
TENSION NOMINALE maximale égale à 600 V et conçus pour fonctionner dans des
conditions normales et dans des emplacements non dangereux, conformément au
Code canadien de l'électricité, Première partie.
La présente norme…
1.1 Connectors Included
This Standard applies to the following types of masonry connectors:
(a) ties used to interconnect the wythes of a wall;
(b) ties used to attach masonry veneer to its structural backing;
(c) anchors used to connect masonry walls to intersecting walls or to other
structural members;
(d) anchors used to attach stone to its structural backing or to interconnect
stone…
Non-recirculating Toilets and Waste Holding Tanks for Use in Recreational
Vehicles
1.1
This Standard covers requirements for non-recirculating toilets and waste
holding tanks and tests for materials, components, proper design and operation,
and other significant properties of construction and finish, as well as
provision for proper installation of the finished product. Marking
requirements are also included.
1.2
Non-recirculating toilets covered by this Standard are…
1.1 Scope
1.1.1 This Standard applies to an independently operating natural gas compressor package intended for use as a natural gas vehicle refuelling appliance, known hereinafter as a VRA.
1.1.2 These requirements apply to a VRA which utilizes integral storage not in excess of that permitted by Section 2.4.
1.1.3 This Standard applies to a VRA intended for the following…
1.1
This Standard applies to electric clothes dryers intended to be used in
nonhazardous locations in accordance with the Canadian Electrical Code, Part 1
(CEC) and the (U.S.) National Electrical Code (NEC), on circuits having a
nominal voltage not exceeding 600 V.
1.2
This Standard applies to both cord-connected and permanently connected
machines. The appliances covered by this…
Canadian Electrical Code Part I - Safety Standard for Electrical Installations
OJECt
The object of this Code is to establish safety standards for the installation
and maintenance of electrical equipment. In its preparation, consideration has
been given to the prevention of fire and shock hazards, as well as proper
maintenance and operation.
Compliance with the requirements of this Code and proper maintenance will
ensure an essentially safe installation.
Wiring…
What's new in 1994 Changes to the CE Code Part I Explained
OBJECt
"The object of this Code is to establish safety standards for the installation
and maintenance of electrical equipment. In its preparation, consideration has
been given to the prevention of fire and shock hazards, as well as proper
maintenance and operation.
Compliance with the requirements of this Code and proper maintenance will
ensure an essentially safe installation…
Object
The object of this Code is to establish safety standards for the installation
and maintenance of electrical equipment. In its preparation, consideration has
been given to the prevention of fire and shock hazards, as well as proper
maintenance and operation.
Compliance with the requirements of this Code and proper maintenance will
ensure an essentially safe installation.…
Aerospace — Pressure re-oiling connection (new type)
Specifies the basic dimensions of a pressure re-oiling connection for use with all oils for aircraft engines, and the clearance envelope to be provided.
