Rechercher

1. Scope 1.1 This standard applies to self-contained household refrigerators and freezers designed to be installed and used in residential occupancies in accordance with the Canadian Electrical Code, Part 1, CSA Standard C22.1, and the National Electrical Code, ANSI/NFPA 70. 1.2 These requirements apply to household refrigerators and freezers intended for connection to 15 or 20 A, 100…

Specifies a system for classifying power take-off (PTO) drive shafts; the requirements for PTO yoke bosses; the PTO drive shaft sizes; the positioning of the power input connection for PTO-driven implements; the clearance zones. Applies to PTO drive shafts required for the connection of agricultural machines and implements to tractors.

1.1 This Standard applies to hydromassage bathtub appliances and associated accessories for residential and commercial use, intented to be permanently connected to a plumbing system and an electrical supply circuit of 250 V and less (ie, 150 V maximum to ground), for use indoors in nonhazardous locations, and for installation in accordance with the Rules of the Canadian Electrical Code,…

Specifies test procedures (leak tightness and pressure resistance of the water circuit, water flow, verification of flexibility at ends, torsion, measurement of insulation resistance, determination of the impedance of the cable, determination of the resistance of the cable, endurance test) for single- and double-conductor secondary connection cables used for resistance welding and allied…

Specifies classification, dimensions (cross-sectional area, length, end lug), designation and materials of double-conductor connection cables used for resistance welding and allied processes. Stipulates the requirements regarding the electrical, mechanical and cooling characteristics of these cables and their conditions of use. Annex A gives additional information when colour coding of the cables…

Specifies dimensions for metric ports for use with the adjustable and non-adjustable stud ends detailed in ISO 6149-2 and ISO 6149-3. Ports in accordance with this part may be used at working pressures up to 63 MPa for non-adjustable stud ends, and 40 MPa for adjustable ones. The permissible working pressure depends upon the stud end size, materials, design, working conditions, application, etc.…

Stud ends in accordance with this part may be used at working pressures up to 63 MPa (630 bar) for non-adjustable stud ends, and 40 MPa (40 bar) for adjustable stud ends. The permissible working pressure depends upon the stud end size, materials, design, working conditions, application, etc. For threaded ports and stud ends specified in new designs in hydraulic power applications, only ISO 6149…

Stud ends in accordance with this part may be used at working pressures up to 40 MPa (400 bar) for non-adjustable stud ends, and 31,5 MPa (315 bar) for adjustable stud ends. The permissible working pressure depends upon the stud end size, materials, design, working conditions, application, etc. For threaded ports and stud ends specified in new designs in hydraulic power applications, only ISO…

Applies to an interface system used to interconnect both programmable and non-programmable electronic measuring apparatus and accessories. Specifies device-independent requirements which need to be met in order to interconnect and communicate unambiguously. Permits apparatus with a wide range of capabilities to be connected to the system. Enables the interconnection of independently manufactured…

S'applique à un système d'interface utilisé pour interconnecter des instruments de mesurage électroniques programmables et non programmables ainsi que des accessoires. Etablit des prescriptions invariables pour les différents appareils, leurs permettant d'être interconnectés et de communiquer sans ambiguïté. Permets aux appareils ayant une large gamme de possibilités d'être…