Technologies de l'information - Télécommunications et échange d'informations
entre système...
La collectivité internationale a décidé de publier cette norme uniquement en
anglais. C'est donc sur cette base qu'on a adopté cette norme comme Norme
nationale du Canada.
La présente Norme nationale du Canada est équivalente à la Norme internationale
ISO/IEC 8878:1992.
1. Domaine d'application
Le service de réseau OSI en mode connexion (CONS) est défini en fonction d'un…
Information technology - Telecommunications and information exchange between
systems - Use of X.25 t...
The international community has decided to make this standard available only in
the English language version. It has been adopted as a National Standard of
Canada on this basis.
This National Standard of Canada is equivalent to International Standard
ISO/IEC 8878:1992.
1. Scope
The OSI Connection-mode Network Service (CONS) is defined in terms of a set of
primitive actions and events and…
Information technology - Telecommunications and information exchange between
systems - Protocol com...
The international community has decided to make this standard available only in
the English language version. It has been adopted as a National Standard of
Canada on this basis.
This National Standard of Canada is equivalent to International Standard
ISO/IEC 8880-2:1992.
1.1 Scope
This part of ISO/IEC 8880 describes the provision and support of the
Connection-mode Network Service…
Information technology - Telecommunications and information exchange between
systems - High-level d...
The international community has decided to make this standard available only in
the English language version. It has been adopted as a National Standard of
Canada on this basis.
This National Standard of Canada is equivalent to International Standard
ISO/IEC 8885:1993.
1 Scope
The principal use of the XID frame is to exchange data link information between
two or more HDLC stations…
1 Scope
1.1 This Standard applies to electric household dishwashers intended to be used
in nonhazardous locations in accordance with the Canadian Electrical Code, Part
I (CEC) and the (US) National Electrical Code (NEC), on circuits having a
nominal voltage not exceeding 250 V.
Note: Wherever practical, for convenience, the term "appliance" has been used
in lieu of dishwasher or…
Metallic tube connections for fluid power and general use — Part 3: O-ring face seal fittings
Specifies general and dimensional requirements for the design and performance of O-ring face seal fittings of steel for tube outside diameters or hose inside diameters of 6 mm to 38 mm, inclusive. These fittings are for use in fluid power and general applications where elastomeric seals can be used to prevent fluid leakage. They are intended for the connection of tubes and hose fittings to ports…
Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 5: Surge ...
Relates to the immunity requirements, test methods, and range of recommended test levels for equipment to unidirectional surges caused by overvoltages from switching and lightning transients. Several test levels are defined which relate to different environment and installation conditions. These requirements are developed for and are applicable to electrical and electronic equipment. Establishes…
1. Scope
1.1
This Standard applies to ac and dc motors with inherent overheating protection
designed to be used in accordance with the Canadian Electrical Code, Part 1, as
follows:
(a) motors with a voltage rating not exceeding 600 V and with a protective
device connected in the motor circuit;
(b) impedance-protected motors with a voltage rating not exceeding 600 V; and
(c) motors…
1. Scope
1.1 General
1.1.1
Except as provided for in Clause 1.1.2, this Standard applies to the design,
construction, installation, operation, and inspection of every refrigerating
system, as provided for by the Act and defined in this Code.
1.1.2
This Standard does not apply to the use of water or air as a refrigerant, nor
to bulk-storage gas tanks that are not permanently…