Rechercher

1. Scope 1.1 This Standard applies to the following products rated at 600 V and less, and designed to be used in nonhazardous locations in accordance with the Rules of the Canadian Electrical Code, Part 1: (a) cord sets and power supply cords for making electrical connection between a power service connection and portable luminaires, appliances, and similar equipment; (b) cord reels for general…

1. SCOPE 1.1 This Standard applies to exhaust cleaning assemblies intended primarily for use with exhaust systems for commercial and institutional type cooking equipment such as ranges, broilers, deep fat fryers, grills, etc. They are complete units typically including filter box, filters, odour removal media, fire damper, fan box, fan and motor controls and control panel. The units…

1. Scope This clause of Part 1 is applicable except as follows: 1.1 Replacement: This standard applies to concrete vibrators, the active part (vibrator bottle) of which is intended to be immersed into the mass of concrete to be vibrated. They may be of one of the following designs: - the motor and the vibrating mechanism are inside the vibrator bottle to which the part containing…

Lays down general and dimensional requirements for the design and performance of 24° cone connectors with O-ring weld-on nipples that are suitable for use with steel and stainless steel tubes with outside diameters from 6 mm to 42 mm, inclusive. These fittings are for use in fluid power and general applications where elastomeric seals can be used.

Specifies limits for harmonic current emissions applicable to electrical and electronic equipment having an input current up to and including 16 A per phase, and intended to be connected to public low-voltage distribution systems. The tests according to this standard are type tests. Test conditions for particular equipment are given in annex C. For systems with nominal voltages less than 220 V (…

La collectivité internationale a décidé de publier cette norme uniquement en anglais. C'est donc sur cette base qu'on a adopté cette norme comme Norme nationale du Canada. La présente Norme nationale du Canada est équivalente à la Norme internationale ISO/IEC 8878:1992. 1. Domaine d'application Le service de réseau OSI en mode connexion (CONS) est défini en fonction d'un…

The international community has decided to make this standard available only in the English language version. It has been adopted as a National Standard of Canada on this basis. This National Standard of Canada is equivalent to International Standard ISO/IEC 8878:1992. 1. Scope The OSI Connection-mode Network Service (CONS) is defined in terms of a set of primitive actions and events and…

The international community has decided to make this standard available only in the English language version. It has been adopted as a National Standard of Canada on this basis. This National Standard of Canada is equivalent to International Standard ISO/IEC 8880-2:1992. 1.1 Scope This part of ISO/IEC 8880 describes the provision and support of the Connection-mode Network Service…

The international community has decided to make this standard available only in the English language version. It has been adopted as a National Standard of Canada on this basis. This National Standard of Canada is equivalent to International Standard ISO/IEC 8885:1993. 1 Scope The principal use of the XID frame is to exchange data link information between two or more HDLC stations…

1 Scope 1.1 This Standard applies to electric household dishwashers intended to be used in nonhazardous locations in accordance with the Canadian Electrical Code, Part I (CEC) and the (US) National Electrical Code (NEC), on circuits having a nominal voltage not exceeding 250 V. Note: Wherever practical, for convenience, the term "appliance" has been used in lieu of dishwasher or…