Printed boards - Part 4: Rigid multilayer printed boards with interlayer connections - Sectional spe...
Applicable to rigid multilayer printed boards irrespective of their
method of manufacture. It is the basis on which agreements between
manufacturer and user are to be made.
Provides additional information necessary to supplement the
requirements of the Generic Specification, IEC 62326-1, for the
printed boards intended to be accepted under the IECQ system.
Establishes uniform requirements,…
Printed boards - Part 4: Rigid multilayer printed boards with interlayer connections - Sectional spe...
Relates to rigid multilayer printed boards with interlayer
connections. Specifies the capability qualifying component, the
characteristics to be tested, the test methods and conditions to be
applied, and the requirements to be fulfilled for testing
capability for performance level A, B or C.
Electromagnetic compatibility (EMC) - Part 6: Generic standards - Section 3: Emission standard for r...
This standard for emission requirements applies to electrical and
electronic apparatus intended for use in the residential,
commercial and light-industrial locations, both indoor and outdoor,
for which no dedicated product or product-family emission standard
exists. Apparatus installed in the locations covered by this
standard are considered to be directly connected to low-voltage
public mains…
Direct connection between power transformers and gas-insulated
metal-enclosed switchgear for rated v...
Applicable to the single-phase connection assemblies between gas-insulated metal-enclosed switchgear for rated voltages of 72,5 kV and above satisfying the requirements of IEC 60517 and power transformers satisfying the requirements of IEC 60076 and fitted with completely immersed bushings satisfying the requirements of IEC 60137, one end of which is immersed in the transformer oil, and the other…
Information technology - Open Systems Interconnection - Presentation service
definition
The international community has decided to make this standard available only in
the English language version. It has been adopted as a National Standard of
Canada on this basis.
This National Standard of Canada is equivalent to International Standard
ISO/IEC 8822:1994.
1 Scope
1.1 This ITU-T Recommendation | International Standard defines (in an abstract
way) the externally visible…
Information technology - Open Systems Interconnection - Protocol for the
Commitment, Concurrency an...
The international community has decided to make this standard available only in
the English language version. It has been adopted as a National Standard of
Canada on this basis.
This National Standard of Canada is equivalent to International Standard
ISO/IEC 9805-1:1994.
1 Scope
This Recommendation | International Standard is to be applied by reference from
other specifications.…
Earth-moving machinery — Lubrication fittings — Part 2: Grease-gun nozzles
Describes the grease-gun nozzles to be used for the injection of grease into the lubrication points of earth-moving machinery in connection with the grease fittings.
Electromagnetic compatibility (EMC) - Part 3: Limits - Section 7:
Assessment of emission limits for ...
This technical report outlines principles which are intended to be used as the basis for determining the requirements for connecting large fluctuating loads (producing flicker) to public power systems. The primary objective is to provide guidance for engineering practices which will ensure adequate quality for all connected consumers. This report primarily focuses on controlling or limiting…
1. Scope
1.1
This Standard applies to ceiling fans intended to be connected to supply
circuits not exceeding 250 V.
1.2
This Standard specifies energy performance requirements for pendant and hugger
style ceiling fans intended for use in residential and commercial and
industrial applications.
This Standard contains general requirements, tests, performance criteria, and
marking of…
