Rechercher

Specifies the dimensions, tolerances, mechanical properties and performance requirements of the working end of keys to be used for metal bone screws with hexagon drive sockets, used as surgical implants.

Applies to newly manufactured direct connected alternating current static watt-hour meters of classes 1 and 2, covered by IEC 61036, which are produced and delivered in quantities of 50 and above. They provide for 100 % inspection or sampling inspection for acceptance by the purchaser.

The international community has decided to make this standard available only in the English language version. It has been adopted as a National Standard of Canada on this basis. This National Standard of Canada is equivalent to International Standard ISO/IEC 7776:1995. 1 Scope This International Standard defines an application of the following HDLc standards: ISO/IEC 3309, ISO/IEC 4335, ISO…

The international community has decided to make this standard available only in the English language version. It has been adopted as a National Standard of Canada on this basis. This National Standard of Canada is equivalent to International Standard ISO/IEC 11575:1995. 1 Scope This International Standard specifies general principles for the mappings between the OSI Data Link service (ISO/IEC…

Specifies dimensions for ports with ISO 261 threads and elastomeric (type E) or metal-to-metal (type B) sealing for general use and in fluid power applications with the stud ends detailed in ISO 9974-2 and ISO 9974-3. It also specifies test methods and the designation of these ports.

Concerns with Private Integrated Service Networks (PISNs) comprising one or more than one PISN exchanges (PINX) interconnected by inter-PINX connections (IPCs). Specifies unter-PINX connections that are provided by intervening networks (IVNs), and the way in which these are handled by PINXs to provide a platform for inter-PINX communication. Identifies the standardization to inter-connect PINXs…

Specifies dimensions, performance requirements and test procedures for heavy-duty (S series) and light-duty (L series) stud ends with ISO 261 threads and the elastomeric sealing that is used with them. It also specifies the designation of these stud ends and their elastomeric sealing.

Specifies dimensions, performance requirements and test procedures for heavy-duty (S series), light-duty (L series) and extra-light-duty (LL series) stud ends with ISO 261 threads and metal-to-metal sealing. It also specifies the designation of these stud ends.

Concerns with Private Integrated Service Networks (PISNs) comprising one or more than one PISN exchanges (PINX) interconnected by inter-PINX connections (IPCs). Specifies unter-PINX connections that are provided by intervening networks (IVNs), and the way in which these are handled by PINXs to provide a platform for inter-PINX communication. Identifies the standardization to inter-connect PINXs…

Specifies requirements for extra low voltage systems for filament lamps intended for ordinary use on supply voltages not exceeding 1 000 V. The luminaires, being connected in parallel, are supplied via freely suspended continuous supporting conductors or profiles. The current in the output circuit of the system is limited to 25 A.