Rechercher

An input/output expansion bus with a 32- or 64-bit width is described in this standard. The SBus is designed for systems requiring a small number expansion ports. SBus Cards may be connected to a standard Sbus Connector mounted on the motherboard. SBus Devices may also be attached to the SBus directly on the system's motherboard. The dimensions of the SBus Card are 83,8 mm by 146,7 mm,…

This ISO/IEC standard for FC-SW specifies tools and algorithms for interconnection and initialization of Fibre Channel switches to create a multi-switch Fibre Channel Fabric. This Standard defines an E_Port (ìExpansion Portî) that operates in a manner similar to an N_Port and F_Port, as defined in ISO/IEC 14165- 111, with additional functionality provided for interconnecting switches. This…

This part of ISO/TS 10811 defines methods of measurement, algorithms for analysis and the report of shock and vibration data for equipment in buildings which is sensitive to shock and vibration. The methods are applicable to the quantification of a future installation or the verification of an existing one. Accurate vibration data acquisition, analysis and uniform reporting methods are needed to…

This part of ISO/TS 10811 defines a method for the classification of shock and vibration in buildings from measurements in accordance with ISO/TS 10811-1. A classification system of environmental vibration conditions should serve as guidelines for designers, manufacturers and users of equipment sensitive to shock and vibration, and for building constructors. The types of shock and vibration…

This part of ISO 14230 specifies the requirements for the Keyword Protocol 2000 (KWP 2000) data link and connected vehicle and scan tool when used to comply with on-board diagnostic (OBD) requirements for emission-related test data. This part of ISO 14230 only specifies requirements relative to the Keyword Protocol 2000 for OBD purposes. Complete specification can be found in ISO 14230 parts 1 to…

International Standard ISO 8835-3:1997 has been adopted with Canadian deviations as CSA Standard CAN/CSA-Z8835-3-00. 1 Scope This part of ISO 8835 specifies requirements for transfer and receiving systems of active anaesthetic gas scavenging systems (AGSS) intended to reduce the exposure of hospital personnel to anaesthetic gases and vapours. It does not apply to nonactive AGSS (…

International Standard ISO 9170-1:1999 has been adopted with Canadian deviations as CSA Standard CAN/CSA-Z9170-1-00. 1 Scope This part of ISO 9170 specifies requirements for terminal units intended for use in medical gas pipeline systems in accordance with ISO 7396-1, for use with the following services: - oxygen; - nitrous oxide; - air for breathing; - carbon dioxide; - oxygen/nitrous…

International Standard ISO 9170-2:1999 has been adopted with Canadian deviations as CSA Standard CAN/CSA-Z9170-2-00. 1 Scope This part of ISO 9170 specifies the requirements and dimensions for terminal units intended for use in anaesthetic gas scavenging disposal systems in accordance with ISO 7396-2. It is intended especially to ensure the type specificity of terminal units and…

Relates to circular connectors for radio and associated sound equipment. Specifies IEC type designations, contact arrangements and connections, dimensions, gauges, rated values, and schedules for type tests.

IEC 62151:2000 Applicable to equipment designed and intended to be connected directly to a Telecommunication Network, regardless of the source of power. This basic safety publication is primarily intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 104 and ISO/IEC Guide 51. It is not intended for use by manufacturers or…