Rechercher

This National Standard of Canada is equivalent to International Standard ISO/IEC 15773:1998. 1 Scope This International Standard specifies the signalling protocol for the support of the Transit Counter additional network feature (ANF-TC) at the Q reference point between Private Integrated Services Network Exchanges (PINXs) connected together within a Broadband Private Integrated Services…

This National Standard of Canada is equivalent to International Standard ISO/IEC 15899:1998. 1 Scope This International Standard specifies service description and control aspects of the broadband connection oriented bearer services which may be provided by Broadband Private Integrated Services Networks (B-PISNs). One of the purposes of the service specification for broadband connection…

CAN/CSA-S826.1-01 Ferry Boarding Facilities - Design 1. Scope 1.1 This Standard specifies requirements that are consistent with current practice for the design of new, or the replacement of existing, boarding facilities, including (a) vehicular and foot passenger ramps and support structures; (b) access interfaces between shore/ramp and ramp/vessel; and (c) operating systems. Note…

1.1 Scope 1.1.1 This standard applies to newly produced direct fired construction heaters, hereinafter referred to as heaters or appliances, constructed entirely of new, unused parts and materials and primarily intended for temporary use in heating buildings or structures under construction, alteration or repair. All the products of combustion generated by the heater are released into…

1. Scope 1.1 The provisions of this Standard apply to electrically operated single- and multiple-station carbon monoxide (CO) alarming devices, hereafter referred to as devices, intended for protection in ordinary indoor residential areas. These areas include, but are not limited to, dwelling units, recreational vehicles and mobile homes, unconditioned areas, health care facilities, nursing…

This CSA Standard is a Harminized Standard with ANSI Z21.75-2001. Part I: Construction 1.1 Scope 1.1.1 This standard applies to newly produced assembled connectors constructed entirely of new, unused parts and materials. Such connectors are intended for exterior use above ground for making the following nonrigid connections: a. Between the gas supply and the gas…

Is applicable to portable phase comparators with or without a built-in power source to be used on electrical systems for voltages from 1 kV to 36 kV a.c. and frequencies from 50 Hz to 60 Hz. This standard is applicable to two-pole phase comparators having a connecting lead between them, two-pole phase comparators operating with a wireless connection and single-pole phase comparators operating…

Applies to motor capacitors intended for connection to windings of asynchronous motors supplied from a single-phase system having a frequency up to and including 100 Hz, and to capacitors to be connected to three-phase asynchronous motors so that these motors may be supplied from a single-phase system. This standard covers impregnated or unimpregnated capacitors having a dielectric of paper,…

This technical report details, with the aid of reference luminaires, an independent method by which the radio disturbance characteristics of electronic ballasts for Class I fluorescent lamp luminaires may be compared against the requirements of CISPR 15. Covers electronic ballasts for double-capped fluorescent lamps fitted with G5 or G13 lamp caps and to single-capped fluorescent lamps fitted…