Rechercher

ISO/IEC TR 19755:2003 specifies a feature for finalizing objects in COBOL. The specification is a Type 2 Technical Report so that implementations can be undertaken on an experimental basis. The experience gained is expected to result in an improved specification that can progress to standardization. The purpose of object finalization is to free resources that will not otherwise be freed by the…

1. SCOPE 1.1 These requirements cover intrusion detection units for burglary protection signalling systems to be employed in outdoor or ordinary indoor (non-hazardous) locations to automatically indicate the presence of an intruder by actuating electrical control circuits. 1.2 An intrusion detector as covered by these requirements consists of one or more unit assemblies of electrical…

ISO 7206-10:2003 applies to femoral heads of partial or total hip-joint replacements of modular construction (i.e. a head/neck conical taper connection) and describes methods of determining the load required, under specified laboratory conditions, to cause failure of the head (disassembly or fracture). It applies to components made of metallic and non-metallic materials. ISO 7206-10:2003 does not…

IEC 60539-2:2003 is applicable to surface mount directly heated negative temperature coefficient thermistors, typically made from transition metal oxide materials with semiconducting properties. These thermistors have metallized connecting pads or soldering strips and are intended to be mounted directly on to substrates for hybrid circuits or on to printed boards.

ISO 22846-1:2003 gives the fundamental principles for the use of rope access methods for work at height. It is intended for use by employers, employees and self-employed persons who use rope-access methods, by those commissioning rope-access work and by rope-access associations. ISO 22846-1 is applicable to the use of rope-access methods on buildings, other structures (on- or offshore) or natural…

IEC 60539-2:2003 is applicable to surface mount directly heated negative temperature coefficient thermistors, typically made from transition metal oxide materials with semiconducting properties. These thermistors have metallized connecting pads or soldering strips and are intended to be mounted directly on to substrates for hybrid circuits or on to printed boards.

ISO 7638-2:2003 gives the dimensions of, and specifies the contact allocation and tests and test requirements for, connectors for the electrical connection of the braking systems and running gear of towing and towed vehicles with 12 V nominal supply voltage. In addition, it specifies a park socket used to receive and store the plug when disconnected.

ISO 7638-1:2003 gives the dimensions of, and specifies the contact allocation and tests and test requirements for, connectors for the electrical connection of the braking systems and running gear of towing and towed vehicles with 24 V nominal supply voltage. In addition, it specifies a park socket used to receive and store the plug when disconnected.

ISO 3732:2003 specifies the dimensions of, and requirements for, 7-pole connectors of type 12 S and their contact allocation for the electrical connection of towing (passenger cars or light commercial vehicles) and towed vehicles with 12 V nominal supply voltage, thus ensuring interchangeability. A 12 S connector is intended to be used in addition to a 12 N connector according to ISO 1724 where…

ISO 4091:2003 gives definitions and specifies tests and requirements for connectors used for the electrical connection of towing and towed road vehicles. It is applicable to connectors of all types used for this purpose, as specified in ISO 1185, ISO 1724, ISO 3731, ISO 3732, ISO 7638-1, ISO 7638-2, ISO 11446 and ISO 12098.