Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, ...
Deals with the safety of gas, oil and solid-fuel burning appliances having electrical connections, for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. The electrical safety and some other safety aspects of these appliances are also covered. All safety aspects are covered when the appliance also complies with…
Appareils électrodomestiques et analogues - Sécurité - Partie 2-102: Règles particulières pour les a...
Deals with the safety of gas, oil and solid-fuel burning appliances having electrical connections, for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. The electrical safety and some other safety aspects of these appliances are also covered. All safety aspects are covered when the appliance also complies with…
Electric appliances connected to the water mains - Avoidance of backsiphonage and failure of hose-se...
Specifies requirements for the connection of appliances to the water mains to prevent backsiphonage of non-potable water into the water mains and flooding due to failure of hose-sets. Appliances include washing machines, dishwashers and other appliances. This includes domestic appliances and those in shops and communal flats. The water pressure is not to exceed 1 MPa. Connection may be temporary…
ISO 18175:2004 describes procedures for evaluating the following performance characteristics of ultrasonic pulse-echo examination instruments:
horizontal limit and linearity;
vertical limit and linearity;
resolution-entry surface and far surface;
sensitivity and noise;
accuracy of calibrated gain controls.
ISO 18175:2004 may be used for the evaluation of a complete examination system,…
Provides procedures for calibrating an optical spectrum analyzer designed to measure the power distribution of an optical spectrum; this analyzer is equiped with an input port for use with a fibre-optic connector. This document applies to optical spectrum analyzers developed for use in fibre-optic communications and is limited to equipment that can directly measure the optical spectrum output…
Quick Disconnect Devices for use with Gas Fuel Appliances
1.1 Scope
1.1.1 This standard applies to newly-produced, hand-operated quick-disconnect devices, hereinafter also referred to as devices, constructed entirely of new, unused parts and materials which provide a means for connecting and disconnecting appliances or appliance connectors to gas supplies and which are for indoor and outdoor applications. These devices shall be equipped with…
Low-Pressure Hose Assemblies for use with Medical Gases
This National Standard of Canada is based on International Standard ISO 5359:2000 (second edition, 2000-11-01).
Scope
1.1
This International Standard specifies requirements for low-pressure hose assemblies intended for use with the following medical gases:
- oxygen;
- nitrous oxide;
- air for breathing;
- helium;
- carbon dioxide;
- xenon;
- specified mixtures of the gases listed above;
- air…
Agricultural Wheeled Tractors - Rear-mounted Three-point Linkage - Part 1: Categories 1, 2, 3 and 4
This National Standard of Canada is based on International Standard ISO 730-1:1994, third edition, 1994-12-15, including Technical Corrigendum 1:1995.
1 Scope
This part of IS0 730 specifies the dimensions and requirements of the three-point linkage for the attachment of implements or equipment to the rear of agricultural wheeled tractors.
It specifies four categories to be used on different…
1 Scope
Notes:
(1) For requirements pertaining to loads acting on connectors, see CSA S304.1.
(2) For requirements pertaining to installation of masonry connectors, see CSA A371.
1.1
This Standard specifies minimum requirements for designing the following masonry connectors:
(a) ties used to
(i) interconnect the wythes of a masonry wall; or
(ii) attach masonry veneer to its structural backing…
Compatibilité électromagnétique (CEM) - Partie 2-4: Environnement - Niveaux de compatibilité dans le...
La présente Norme nationale du Canada est équivalente à la Norme internationale CEI/IEC 61000-2-4:2002 (deuxième édition, 2002-06).
1 Domaine d'application
La présente partie de la CEI 61000 est relative aux perturbations conduites dans le domaine de fréquence de 0 kHz à 9 kHz. Elle fournit les valeurs numériques des niveaux de compatibilité pour les réseaux de distribution d'énergie…
