Road vehicles — Connectors for the electrical connection of towing and towed vehicles — 7-pole conne...
ISO 1185:2003 specifies the dimensions of, and gives particular requirements for, 7-pole connectors of type 24 N and their contact allocation for the electrical connection between towing and towed vehicles with 24 V nominal supply voltage, thus ensuring interchangeability.
Road vehicles — Connectors for the electrical connection of towing and towed vehicles — 7-pole conne...
ISO 3731:2003 specifies the dimensional characteristics of, and specific requirements for, 7-pole connectors of type 24 S and their contact allocation for the electrical connection of towing and towed vehicles with 24 V nominal supply voltage, thus ensuring interchangeability. A 24 S connector is intended to be used in addition to a 24 N connector according to ISO 1185 where more than 7 poles are…
Live working - Insulating hoses with fittings for use with hydraulic tools and equipment
Is applicable to mobile insulating hoses with fittings used with hydraulic tools and equipment for live working at nominal voltages exceeding 1 kV r.m.s. at power frequency. Insulating hoses with fittings are used to provide a connection between the hydraulic tool and the pump which are at different potentials. They are not considered as a fixed component of a live working device (e.g. aerial…
Travaux sous tension - Conduits flexibles isolants avec raccords utilisés avec les outils et matérie...
Est applicable aux conduits flexibles isolants avec raccords portables utilisés avec des outils et matériels hydrauliques pour travaux sous tension sur réseaux électriques à fréquence industrielle, de tension nominale supérieure à 1 kV efficace. Ces conduits flexibles isolants avec raccords sont utilisés pour effectuer la connexion entre l'outil hydraulique et la pompe qui sont à des…
Thermal performance of windows, doors and shutters — Calculation of thermal transmittance — Part 2: ...
ISO 10077-2:2003 specifies a method and gives reference input data for the calculation of the thermal transmittance of frame profiles and of the linear thermal transmittance of their junction with glazings or opaque panels.
The method can also be used to evaluate the thermal resistance of shutter profiles and the thermal characteristics of roller shutter boxes.
ISO 10077-2:2003 also gives…
Corrigendum 1 - Surge protective devices connected to low-voltage power distribution systems - Part ...
IEC 61643-1(Edition 1.1 - 2002) Corrigendum 1 Surge protective devices connected to low-voltage power distribution systems - Part 1: Performance requirements and testing methods
Corrigendum 1 - Dispositifs de protection contre les surtensions connectés aux réseaux de distributi...
CEI 61643-1(Edition 1.1 - 2002) Corrigendum 1 Dispositifs de protection contre les surtensions connectés aux réseaux de distribution basse tension - Partie 1: Prescriptions de fonctionnement et méthodes d'essai
1.1 Scope
1.1.1 This standard applies to line pressure regulators, (see Part V, Definitions), hereinafter referred to as regulator(s), either individual or in combination with over pressure protection devices, hereinafter referred to as device(s), intended for application in natural gas piping systems between the service regulator and the gas appliance(s).
1.1.2 This standard applies to…
Breathing System Filters for Anaesthetic and Respiratory Use - Part 2: Non-Filtration Aspects
This National Standard of Canada is equivalent to International Standard ISO 23328-2:2002 (first edition, 2002-10-15).
1 Scope
This part of ISO 23328 specifies requirements for non-filtration aspects of breathing system filters (BSF) intended for anaesthetic and respiratory use, and addresses connection ports, leakage, resistance to flow, packaging, marking and information supplied.
The test…
