Rechercher

CSA Preface This is the first edition of CSA T568.2-1, Commercial building telecommunications cabling standard - Part 2: Balanced twisted pair cabling components - Addendum 1 - Transmission performance specifications for 4-pair 100 category 6 cabling. This Standard is an adoption of the identically titled ANSI/TIA/EIA (American National Standards Institute/Telecommunications Industry…

CSA Preface This is the first edition of CSA T568.2, Commercial building telecommunications cabling standard - Part 2: Balanced twisted-pair cabling components. It replaces T529-95, Telecommunications Cabling Systems in Commercial Buildings. This Standard is an adoption of the identically titled ANSI/TIA/EIA (American National Standards Institute/Telecommunications Industry Association/…

CSA Preface This is the first edition of CSA T568.1-2, Commercial building telecommunications cabling standard - Part 1: General requirements - Addendum 2 - Grounding and bonding specifications for screened balanced twisted-pair horizontal cabling. This Standard is an adoption of the identically titled ANSI/TIA (American National Standards Institute/Telecommunications Industry Association)…

ISO 7919-5:2005 gives guidelines for applying evaluation criteria for shaft vibration measured at, or close to, the bearings of machines or machine sets in hydraulic power generating and pumping plants under normal operating conditions. These guidelines are presented in terms of both steady-state running vibration and any amplitude changes that can occur in these steady vibration values. ISO 7919…

ISO 24410:2005 provides for the interchangeability of attachments on skid steer loaders by establishing dimensional limits for the attachment interface. It is applicable to skid steer loaders whose operating mass according to ISO 6165 is 4 500 kg or less. Narrow skid steer loaders may have a width that does not allow compliance. Its requirements do not restrict the design of the attachment…

L'ISO 24410:2005 prévoit l'interchangeabilité des accessoires des chargeuses à direction articulée en établissant des limites dimensionnelles pour l'interface d'attelage. Elle est applicable aux chargeuses à direction articulée dont la masse en service, selon l'ISO 6165, est inférieure ou égale à 4 500 kg. Les chargeuses à direction articulée étroites peuvent avoir une…

ISO 6218:2005 specifies dimensions and safety requirements for manually operated coupling devices (securing devices) used for assembling inland navigation vessels as a push tow or vessels coupled alongside by means of wire rope connections. It also gives rules for designation and testing.

ISO 7240-13:2005 specifies the requirements for compatibility and connectability assessment of system components that either comply with the requirements of ISO 7240 or with a manufacturer's specification where there is no ISO 7240 International Standard. ISO 7240-13:2005 includes only system requirements when these are necessary for compatibility assessment. ISO 7240-13:2005 also specifies…

Applicable to the safety of stationary electric cooking ranges, hobs, ovens and similar appliances, their rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral, and 480 V for other appliances. This consolidated version consists of the fifth edition (2002) and its amendment 1 (2004). Therefore, no need to order amendment in addition to this…

The general objectives of ISO/IEC 18028 are to extend the IT security management guidelines provided in ISO/IEC TR 13335 by detailing the specific operations and mechanisms needed to implement network security safeguards and controls in a wider range of network environments, providing a bridge between general IT security management issues and network security technical implementations. ISO/IEC…