Rechercher

This National Standard of Canada is based on International Standard IEC 60335-2-76:2002. 1 Scope This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric fence energizers, the rated voltage of which is not more than 250 V and by means of which fence wires in agricultural, feral animal control and security fences may be electrified…

1 Scope 1.1 This Standard applies to complete vent (flue)-connected, oil-fired steam, and/or hot-water boilers that are provided with automatic control devices. 1.2 This Standard applies to (a) boilers intended for residential use having an input of less than 11.5 L/h (3 USGPH), which is approximately equivalent to 117 kW (400 000 Btu/h); (b) low-pressure boilers intended for commercial…

applies to passive filter units for electromagnetic interference suppression which fall within the scope of the Generic Specification IEC 60939-1. The scope of this Sectional specification is restricted to passive filter units for which safety tests are appropriate. This implies that filters specified according to this Sectional specification will either be connected to mains supplies, when…

applicable to fixed surface mount capacitors for direct current, with metallized electrodes and polyethylene naphthalate dielectric for use in electronic equipment. These capacitors have metallized connecting pads or soldering strips and are intended to be mounted directly onto substrates for hybrid circuits or onto printed boards. These capacitors may have "self healing properties"…

applicable to fixed surface mount capacitors for direct current, with metallized electrodes and polyethylene naphthalate dielectric for use in electronic equipment. These capacitors have metallized connecting pads or soldering strips and are intended to be mounted directly onto substrates for hybrid circuits or onto printed boards. These capacitors may have "self healing properties"…

IEC 60939-2:2005 applies to passive filter units for electromagnetic interference suppression which fall within the scope of the Generic Specification IEC 60939-1. The scope of this Sectional specification is restricted to passive filter units for which safety tests are appropriate. This implies that filters specified according to this Sectional specification will either be connected to mains…

L'IEC 60939-2:2005 s’applique aux filtres passifs d’antiparasitage qui entrent dans le domaine d’application de la spécification générique IEC 60939-1. Le domaine d’application de la présente spécification intermédiaire est restreint aux filtres passifs pour lesquels des essais de sécurité sont appropriés. Par conséquent, les filtres spécifiés selon la présente spécification intermédiaire…

ISO 12858-3:2005 specifies the most important requirements of tribrachs used in geodesy for the connection of the instrument's body with its base. The requirements in ISO 12858-3:2005, however, do not guarantee the full interchangeability of the instrument's body with tribrachs of different manufacturers, but give the detailed specifications of the clamp system to ensure the reliable…

Preface This is the first edition of AAMA/WDMA/CSA 101/I.S.2/A440-05, Standard/Specification for windows, doors, and unit skylights, jointly published by the American Architectural Manufacturers Association (AAMA), the Window & Door Manufacturers Association (WDMA), and the Canadian Standards Association (CSA). 1 Scope 1.1 General This fenestration Standard/Specification applies to both…

1 Scope 1.1 This Standard applies to the design of aluminum alloy members and assemblies intended to carry a known load. 1.2 This Standard specifies requirements for the design of members to meet the requirements of the National Building Code of Canada using limit states design procedures. 1.3 This Standard contains rules to determine the ultimate resistance of aluminum members and connections…