Household and similar electrical appliances - Safety - Part 2-90: Particular requirements for commer...
The safety of microwave ovens with a cavity door intended for commercial use, their rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral and 480 V for other appliances.It also deals with the safety of microwave ovens without a cavity door and with transportation means that are intended for commercial use only.
This publication is to be read…
Textile machinery and accessories — Yarn feeders and yarn control for knitting machines — Part 2: Co...
ISO 13990-2:2006 specifies the connecting dimensions for the mounting and electrical installation of yarn feeders and yarn control devices, as defined in ISO13990-1, for knitting machines.
Vehicles, Boats, and Internal Combustion Engine Driven Devices-Radio Disturbance Characteristics-Lim...
This National Standard of Canada is based on International Standard CEI/IEC CISPR 12, fifth edition, 2001-09).
1 Scope
The limits in this International Standard are designed to provide protection for broadcast receivers in the frequency range of 30 MHz to 1 000 MHz when used in the residential environment.
Compliance with this standard may not provide adequate protection for new types of radio…
Pressure regulators for use with medical gases — Part 1: Pressure regulators and pressure regulators...
ISO 10524-1:2006 is applicable to the types of pressure regulators listed and is intended for the administration of the following medical gases in the treatment, management, diagnostic evaluation and care of patients:
oxygen;nitrous oxide;air for breathing;helium;carbon dioxide;xenon;mixtures of the gases listed above;air for driving surgical tools;nitrogen for driving surgical tools.
These…
Textile machinery and accessories — Yarn feeders and yarn control for knitting machines — Part 3: Di...
ISO 13990-3:2006 specifies the dimensions of multi-wire connecting cable and interconnection cable of low voltage for the electrical installation of yarn feeders and yarn control devices according to ISO 13990-2.
Fixed capacitors for use in electronic equipment - Part 19: Sectional specification: Fixed metallize...
IEC 60384-19:2006 is applicable to fixed surface mount capacitors for direct current, with metallized electrodes and polyethylene-terephthalate dielectric for use in electronic equipment. These capacitors have metallized connecting pads or soldering strips and are intended to be mounted direct onto substrates for hybrid circuits or onto printed boards. These capacitors may have "self-healing…
Fixed capacitors for use in electronic equipment - Part 19: Sectional specification: Fixed metallize...
IEC 60384-19:2006 is applicable to fixed surface mount capacitors for direct current, with metallized electrodes and polyethylene-terephthalate dielectric for use in electronic equipment. These capacitors have metallized connecting pads or soldering strips and are intended to be mounted direct onto substrates for hybrid circuits or onto printed boards. These capacitors may have "self-healing…
Protection against lightning - Part 1: General principles
Provides the general principles to be followed in the protection against lightning of
- structures including their installations and contents as well as persons,
- services connected to a structure.
The following cases are outside the scope of this standard:
- railway systems;
- vehicles, ships, aircraft, offshore installations;
- underground high pressure pipelines;
- pipe, power and…
Industrial valves — Measurement, test and qualification procedures for fugitive emissions — Part 1: ...
ISO 15848-1:2005 specifies testing procedures, for evaluation of external leakage of valve stem seals (or shaft) and body joints of isolating valves and control valves intended for application in volatile air pollutants and hazardous fluids. End connection joints, vacuum application, effects of corrosion and radiation are excluded from ISO 15848-1:2005.
ISO 15848-1:2005 concerns classification…
Canadian Electrical Code, Part I (20th Edition), Safety Standard for Electrical Installations
Scope
This Code covers all electrical work and electrical equipment operating or intended to operate at all voltages in electrical installations for buildings, structures, and premises, including factory-built relocatable and non-relocatable structures, and self-propelled marine vessels stationary for periods exceeding five months and connected to a shore supply of electricity continuously or…
