Rechercher

ISO/IEC 18028-5:2006 provides detailed guidance on the security aspects of the management, operation and use of IT networks, and their inter-connections. ISO/IEC 18028-5:2006 defines techniques for securing inter-network connections that are established using virtual private networks (VPNs). It is relevant to all personnel who are involved in the detailed planning, design and implementation of…

1 Scope This International Standard is applicable to portable phase comparators with or without a builtin power source to be used on electrical systems for voltages from 1 kV to 36 kV a.c. and frequencies from 50 Hz to 60 Hz. This standard is applicable to two-pole phase comparators having a connecting lead between them, two-pole phase comparators operating with a wireless connection and…

1.1 Scope 1.1.1 This standard applies to newly produced compressed Natural Gas Vehicle (NGV) fueling connection devices, hereinafter referred to as devices, constructed entirely of new, unused parts and materials. NGV fueling connection devices shall consist of the following components, as applicable: 1. Receptacle and protective cap (mounted on vehicle) (see 1.5, Receptacles); 2. Nozzle (…

The CSA Standard is based on International Standard ISO 7396-1:2002. 1 Scope 1.1 This Standard specifies safety requirements for medical gas pipeline systems in health care facilities. It is intended for use by anyone involved in the design, construction, inspection, and operation of medical gas systems. 1.2 The provisions of this Standard are intended to ensure that each medical gas…

ISO 23551-2:2006 specifies safety, constructional and performance requirements for pressure regulators intended for use with gas burners and gas burning appliances. It also describes the test procedures for checking compliance with these requirements and provides information necessary for the purchaser and user. ISO 23551-2:2006 applies to pressure regulators for gas burners and gas burning…

ISO 14978:2006 specifies the general requirements, terms and definitions of characteristics of simple GPS measuring equipment, e.g. micrometers, dial gauges, callipers, surface plates, height gauges, gauge blocks, but not necessarily excluding more complicated equipment. It forms the basis for standards defining and describing the design characteristics and metrological characteristics for…

ISO/TS 17431:2006 specifies an intermediate-scale test method that simulates a fire that under well-ventilated conditions starts in a corner of a small room with a single doorway and can develop until the room is fully involved in the fire. ISO/TS 17431:2006 is primarily intended to evaluate the contribution to toxic hazard in, and potential for fire spread to, evacuation routes connected to the…

ISO/TS 16952-1:2006 establishes comprehensive and practice-oriented principles and rules for the designation of technical objects within a system, as well as for the designation of connections, signals and documents in accordance with the corresponding basic standards. The principles of ISO/TS 16952-1:2006 apply to all technical fields for all industries and can be applied in all phases of the…

This part of IEC 62271 specifies the service conditions, rated characteristics, general structural requirements and test methods of HV/LV or LV/HV prefabricated substations, which are cable-connected, to be operated from inside (walk-in type) or outside (non-walk-in type) for alternating current of rated voltages above 1 kV and up to and including 52 kV on the HV side, and for one or more…

La présente Norme Internationale prescrit les conditions de service, les caractéristiques assignées, les exigences structurelles générales, et les méthodes d'essai applicables aux postes préfabriqués HT/BT ou BT/HT qui sont connectés par câble, pour être man uvrés de l'intérieur (à aire de man uvre) ou de l'extérieur (sans aire de man uvre), pour courant alternatif de tensions…