Rechercher

This National Standard of Canada is equivalent to International Standard ISO 6489-3:2004. 1 Scope This part of ISO 6489 specifies the dimensional requirements and location for category 0, 1, 2, 3, 4 and 5 drawbars mounted on the rear of agricultural tractors. ********************************************************************** Endorsed standard ISO 6489-3:2004 replaces this standard

This part of IEC 60947 applies to control and protective switching devices (or equipment) (CPS), the main contacts of which are intended to be connected to circuits of rated voltage not exceeding 1 000 V a.c. or 1 500 V d.c. CPSs are intended to provide both protective and control functions for circuits and are operated otherwise than by hand. They may also fulfill additional functions, such as…

Contains specific requirements for the construction, testing and marking of electrical equipment, parts of electrical equipment and Ex components in the type of protection powder filling "q", intended for use in explosive gas atmospheres. The significant changes with respect to the previous edition are: all requirements for third-party certification removed; requirements for…

This part of IEC 60079 specifies the requirements for the construction and testing of oil-immersed electrical equipment, oil-immersed parts of electrical equipment and Ex components in the type of protection oil immersion "o", intended for use in explosive gas atmospheres. The significant changes with respect to the previous edition are: all requirements for third-party certification…

This National Standard of Canada is based on International Standard ISO 7376:2003. 1 Scope This International Standard specifies general requirements for laryngoscopes and critical dimensions for the handle and lamp of hook-on type laryngoscopes. It is applicable only to instruments with an electrical power source for illuminating the larynx, since electrical safety requirements may be more…

1.1 Scope 1.1.1 This standard applies to newly produced outdoor cooking gas appliances (see Part IV, Definitions), constructed entirely of new, unused parts and materials. Outdoor cooking gas appliances submitted for examination under this standard shall be classified as either portable, stationary or built-in. 1.1.2 This standard applies to outdoor cooking gas appliances mounted to the…

Ce document constitue la norme commune à la CSA et aux UL. 1.1 Domaine d'application 1.1.1 Matériels couverts par la présente norme La présente norme est applicable aux matériels de traitement de l'information alimentés par le réseau ou alimentés par batteries, y compris les matériels de bureau électriques et les matériels associés, de TENSION ASSIGNÉE maximale égale à 600 V…

This National Standard of Canada is based on International Standard CEI/IEC 60044-5:2004. 1 Scope This part of IEC 60044 applies to new single-phase capacitor voltage transformers connected between line and ground for system voltages Um . 72,5 kV at power frequencies from 15 Hz to 100 Hz. They are intended to supply a low voltage for measurement, control and protective functions. The…

La présente norme nationale du Canada est basee sur la norme internationale CEI/IEC 60044-5:2004. 1 Domaine d'application La presente partie de la CEI 60044 s'fapplique aux transformateurs condensateurs de tension monophases neufs connectes entre la ligne et la terre pour des tensions de reseau Um - 72,5 kV aux frequences industrielles comprises entre 15 Hz et 100 Hz. Ils sont…

1 Scope 1.1 This Standard covers drinking water treatment systems that are (a) point-of-use or point-of-entry plumbed systems; and (b) point-of-use non-plumbed systems. Note: Drinking water treatment systems covered by this Standard are intended to be used for the reduction or inactivation of harmful substances that can be present in drinking water. 1.2 This Standard includes…