Emballage de composants pour opérations automatisées - Partie 3: Emballage des composants appropriés...
La CEI 60286-3:2007 est applicable à la mise en bande des composants électroniques sans fils de sortie ou avec tronçons de sortie destinés à être connectés à des circuits électroniques. Elle fournit uniquement les dimensions essentielles pour la mise sur bande de composants destinés aux opérations mentionnées ci-dessus. Cette quatrième édition annule et remplace la troisième édition publiée en…
1 Domaine d'application
1.1
Cette norme vise les systèmes de traitement de l'eau potable suivants :
a) systèmes au point d'utilisation ou au point d'entrée reliés à l'installation de plomberie ; et
b) systèmes au point d'utilisation non reliés à l'installation de plomberie.
Note : Les systèmes de traitement de l'eau potable visés par cette norme sont…
Connectors for Outdoor Gas Appliances and Manufactured Homes
1.1 Scope
1.1.1 This standard applies to newly produced assembled connectors constructed entirely of new, unused parts and materials. Such connectors are intended for exterior use above ground for making the following nonrigid connections:
a. Between the gas supply and the gas inlet of an appliance for outdoor installation that is not frequently moved after installation. These connectors are…
Optics and photonics — Optical transfer function — Definitions and mathematical relationships
ISO 9334:2006 defines terms relating to the optical transfer function and indicates, where pertinent, the mathematical relationships between those terms. It also defines important parameters that should be specified in connection with optical transfer function testing.
The terms and parameters defined in this ISO 9334:2006 apply to all measurements of the optical transfer function for optical,…
Medical electrical equipment - Recurrent test and test after repair of medical electrical equipment
Applies to testing of medical electrical equipment and medical electrical systems, hereafter referred to as me equipment and me systems, or parts of such equipment or systems, which comply with IEC 60601-1, before putting into service, during maintenance, inspection, servicing and after repair or on occasion of recurrent tests to assess the safety of such me equipment or me systems or parts…
Adaptors for fibre optic connectors - Part 1: Generic specification
Relates to individual fibre optic adaptors such as: -adaptors for connecting a plug connector to an identical type of plug connector; -adaptors for connecting one type of plug connector to a different type of plug connector; -adaptors for connecting a fibre optic connector to their optical devices such as LEDs, switches, etc. The specification includes: -adaptor requirements; -quality assessment…
Medical gas pipeline systems — Part 2: Anaesthetic gas scavenging disposal systems
ISO 7396-2:2007 specifies requirements for the design, installation, function, performance, documentation, testing and commissioning of anaesthetic gas scavenging disposal systems, to ensure patient safety and to minimize exposure of the operator and other persons to anaesthetic gases and vapours. It includes requirements for the power device, pipeline system, performance, non-interchangeability…
1.1 Scope
1.1.1
This standard applies to newly produced outdoor specialty gas appliances (see Part IV, Definitions), hereinafter referred to as appliances, constructed entirely of new, unused parts and materials. Appliances submitted for examination under this standard shall be classified as portable. These products are not intended for commercial use.
1.1.2
This standard applies to…
Agricultural Tractors and Machinery - Power Take-Off Drive Shafts and Power-Input Connection - Part ...
This National Standard of Canada is equivalent to International Standard ISO 5673-1:2005.
1 Scope
This part of ISO 5673 specifies the power take-off (PTO) drive shafts of a tractor or self-propelled machine used in agriculture and the power-input connection (PIC) of its implement, establishing a method for determining PTO static and dynamic torsional strength while giving manufacturing and…
Agricultural Tractors and Machinery - Power take-Off Drive Shafts and Power-Input Connection - Part ...
This National Standard of Canada is equivalent to International Standard ISO 5673-2:2005.
1 Scope
This part of ISO 5673 gives the forms and applications of power take-off (PTO) drive shafts for tractors and self-propelled machines used in agriculture, and specifies the dimensions for, and clearance zone around, the implement power-input connection (PIC) for a variety of attachments. Its…
