ABOVEGROUND STEEL TANKS
FOR FUEL OIL AND LUBRICATING OIL
1. SCOPE
1.1 This Standard covers the design and construction of aboveground steel non-
pressure tanks intended for installation inside or outside buildings and for the storage of:
A Combustible liquid intended to be used as heating fuel and/or generator
fuel; and
B Lubricating oil.
NOTE 1: These tanks may also be used for the storage of used oil as a heating and/or
generator fuel. For tanks…
RÉSERVOIRS EN ACIER NON ENTERRÉSPOUR LE MAZOUT ET L'HUILE LUBRIFIANTE
1. DOMAINE D'APPLICATION
1.1 La présente norme porte sur la conception et la construction de réservoirs non
pressurisés non enterrés en acier destinés à être installés à l'intérieur ou à l'extérieur de
bâtiments et au stockage de :
A Liquide combustible destiné à être utilisé comme huile de chauffage ou
huile pour génératrice;
B Huile lubrifiante.
REMARQUE 1 : Ces…
1 Scope
1.1 This Standard applies to grounding and bonding equipment for use in accordance with the Canadian Electrical Code, Part I, CSA C22.1, in Canada or the National Electrical Code, NFPA 70, in the United States.
1.2 This Standard applies to the following grounding and bonding equipment:
(a) ground clamps, bonding devices, grounding bushings, water-meter shunts, grounding electrodes, and…
Interface de commande commune des produits audio et vidéo numériques connectés en réseaux - Partie 1...
La CEI 62379:2007 spécifie une interface de commande pour des produits transmettant des signaux audio et/ou vidéo sur des réseaux numériques. La présente version bilingue (2012-08) correspond à la version anglaise monolingue publiée en 2007-08.
Metallic tube connections for fluid power and general use — Part 2: 37 degree flared connectors
ISO 8434-2:2007 specifies general and dimensional requirements for the design and performance of 37° flared connectors that are suitable for use with ferrous and non-ferrous tubes with outside diameters from 6 mm to 50,8 mm, inclusive. These connectors are for use in fluid power and general applications within the limits of pressure and temperature specified.
They are intended for the connection…
Metallic tube connections for fluid power and general use — Part 1: 24 degree cone connectors
ISO 8434-1:2007 specifies the general and dimensional requirements for 24° cone connectors using cutting ring and O‑ring seal cone (referred to as DKO) suitable for use with ferrous and non‑ferrous tubes with outside diameters from 4 mm to 42 mm inclusive. These connectors are for use in fluid power and general applications within the limits of pressure and temperature specified in ISO 8434-1:…
Semiconductor die products - Part 7: XML schema for data exchange
This technical report has been developed to facilitate the production, supply and use of semiconductor die products, including: wafers, singulated bare die, die and wafers attached connection structures and minimally or partially encapsulated die and wafers. This report contains an XML schema that describes the elements needed for data exchange and that will allow the implementation of the…
High-voltage switchgear and controlgear - Part 207: Seismic qualification for gas-insulated switchge...
This International Standard applies to switchgear assemblies for alternating current of rated voltages above 52 kV for indoor and outdoor installations, including their supporting structure rigidly connected to the ground, and does not cover the seismic qualification of live tank circuit breakers. Switchgear assemblies do have typically low centers of gravity, e.g. gas-insulated switchgear (GIS…
Semiconductor die products - Part 4: Questionnaire for die users and suppliers
This technical report has been developed to facilitate the production, supply and use of semiconductor die products, including wafers; singulated bare die; die and wafers with attached connection structures; minimally or partially encapsulated die and wafers. This report contains a questionnaire, based on the requirements of other parts of IEC 62258, which may be used in negotiations and…
