Rechercher

L'IEC 60335-2-64:2002+AMD1:2007 traite de la sécurité des machines de cuisine électriques à usage commercial non destinées à un usage domestique, dont la tension assignée n'est pas supérieure à 250 V pour les appareils monophasés connectés entre une seule phase et le neutre, et à 480 V pour les autres appareils. Ces appareils sont utilisés, par exemple, dans les restaurants, les…

CISPR 25:2008 contains limits and procedures for the measurement of radio disturbances in the frequency range of 150 kHz to 2 500 MHz. The standard applies to any electronic/electrical component intended for use in vehicles, trailers and devices. Refer to International Telecommunications Union (ITU) publications for details of frequency allocations. The limits are intended to provide protection…

IEC 60204-32 applies to the application of electrical and electronic equipment and systems to hoisting machines and related equipment. The equipment covered by this standard commences at the point of connection of the supply to the electrical equipment of the hoisting machine (crane-supply-switch) including systems for power supply and control feeders situated outside of the hoisting machine, for…

ISO 22900-1:2008 provides the framework to allow diagnostic and reprogramming software applications from all vehicle manufacturers the flexibility to work with multiple vehicle communication interfaces (VCI) from multiple tool suppliers. This system enables each vehicle manufacturer to support all vehicle communication interfaces to perform diagnostics and to control the programming sequence for…

ISO 3828:2008 establishes the vocabulary for the various terms in use relative to ship's deck machinery. It defines, in English, general terms used in connection with this subject, and includes specific terms associated with anchoring and mooring, cargo handling, towing, ancillary deck equipment and special deck machinery of working and oceanographic research ships. In the preparation of…

1 Scope 1.1 This Standard applies to manufactured and modular homes designed to be supported on longitudinal floor beams. Note: For simplicity, the term "manufactured home" is used in this Standard to refer to both manufactured homes and modular homes. 1.2 This Standard includes requirements for the following aspects of manufactured home installation: (a) site preparation; (b)…

1.1 Scope 1.1.1 This standard applies to newly produced, gas-fired low-intensity infrared heaters and infrared radiant tube heaters (see Part IV, Definitions), hereinafter referred to as heaters or appliances, constructed entirely of new, unused parts and materials with inputs up to and including 400 000 Btu/hr (117.23 kW) per burner: a. For use with natural gas; b. For use with…

Z240.0.2-08 1 Scope 1.1 This Standard specifies dimensional and safety requirements for recreational vehicles. Its purpose is to specify minimum criteria for providing a degree of protection against loss of life from fire and explosion. 1.2 The CSA Z240 RV Series of Standards does not apply to park model trailers. Note: Park model trailers are covered by the CAN/CSA-Z241 Series of Standards.…

1 Scope 1.1 This Standard applies to household and commercial electrical hairdressing equipment of the portable, pedestal, and table-mounted types, including hair dryers, hair steamers, combs, curlers, and the attachments with which they are sold, rated at 250 V and less, designed for use in nonhazardous locations in accordance with the Rules of the Canadian Electrical Code, Part I. 1.2 This…

This Technical Report, which is informative in its nature, provides guidance on principles which can be used as the basis for determining the requirements for the connection of distorting installations to MV, HV and EHV public power systems (LV installations are covered in other IEC documents). For the purposes of this report, a distorting installation means an installation (which may be a load…